Canary GFT-1037E4A 用户手册
Gigabit Ethernet Copper-to-Fiber Converters
GFT-1037A and GFT-1037 – UTP-to-Single-Fiber, Bi-Directional Single-Mode
•
1000BASE-T Autonegotiation for Full-duplex and Half-
duplex operation with Flow-Control and;
•
Switch selectable, Fiber-Port Autonegotiation for common,
end-to-end Flow-Control, and link awareness, or for blind
connection to Gigabit fiber ports on older switches
•
Internal Auto-sensing, MDI / MDI-X crossover switch for
Network Interface Card or Switch connections
•
Uses Single-Fiber, single-mode connectors operating on
1550 ηm and 1310 ηm wavelengths
•
Dual power jacks for connecting optional, redundant power
supply
•
Optional: UK, Continental European power
•
Auto-sensing 100/240 VAC power supply
•
Transparent to Flow-Control commands such as PAUSE
•
A full array of status / diagnostic LEDs
Canary’s Gigabit,
Single-Fib er Bi-
Directional Single-
mode converters
deliver long-range
Gigabit data access
over single fiber
s t r a n d , s i n g l e
mode segments.
G F T 10 37 A / B
converters are
designed to free-
up fiber capacity by using dual wavelengths over a single strand of
a duplex fiber pair. They are ideal for data intensive backbones in
the enterprise or across the campus where extra fiber capacity is
lacking but redundancy or additional access is needed to add
channels or alternate protocols.
Canary’s Single-Fiber, Bi-Directional converters are functionally
identical to standard units with the exception that units designated
with an A (GFT-1037A) transmit at 1550 ηm and receive on
1310 ηm, while B units (GFT-1037B) transmit at 1310 ηm and receive
on 1550 ηm. Single-Fiber converters must be connected
as complementary A & B pairs. (A and B units must be ordered in
1310 ηm, while B units (GFT-1037B) transmit at 1310 ηm and receive
on 1550 ηm. Single-Fiber converters must be connected
as complementary A & B pairs. (A and B units must be ordered in
pairs because every A unit must be connected to a B unit.) Similarly,
standalone A & B units can be connected to complementary A & B
modules used in the CCN-2000/0400 or CCM-1600 Chassis
families. Canary Gigabit Single-Fiber converters are available with
20 or 40 kilometer transmission ranges.
Ordering Information
Gigabit Ethernet
Media
Min. Tx
Max. Tx
Rx
Min. PWR
Max.PWR
Max. Input
Connector
Wavelengths
Transmit
Model Numbers
Types
PWR
PWR
Sensitivity
Budget
Budget
PWR
Type
(ηm)
Distance
GFT-1037A
UTP / SM
-8.0 dBm
-3.0 dBm
-21.0 dBm
13.0 dB
18.0 dB
-3.0 dBm
SC
1550/1310
20 Km
GFT-1037B
UTP / SM
-8.0 dBm
-3.0 dBm
-21.0 dBm
13.0 dB
18.0 dB
-3.0 dBm
SC
1310/1550
20 Km
GFT-1037E4A
UTP / SM
-3.0 dBm
2.0 dBm
-23.0 dBm
20.0 dB
25.0 dB
-3.0 dBm
SC
1550/1310
40 Km
GFT-1037E4B
UTP / SM
-3.0 dBm
2.0 dBm
-23.0 dBm
20.0 dB
25.0 dB
-3.0 dBm
SC
1310/1550
40 Km
* NOTE: GFT-1037X / GFT-1037E4X standalone converters are available as card modules for Canary’s CCM-1600 and CCN-2000 / CCN-0400 Chassis models.
Please refer to the CCM-1600 and CCN-2000 / CCN-0400 Data Sheets for more information.
Please refer to the CCM-1600 and CCN-2000 / CCN-0400 Data Sheets for more information.
More versions of the GFT-1037A/B series may be found on the Canary web site as they become available.
Optical Specifications
Illustrated: Gigabit Ethernet Single-Fiber,
Bi-Directional converter.
Bi-Directional converter.