Intel DN2800MT BLKDN2800MTE 用户手册

产品代码

BLKDN2800MTE

proceSSor

processor Support

• Intel® Atom™ processor N2800 (dual-core / 1.86 GHz /

Intel® Hyper-Threading Technology

/ 512 KB x 2 L2

cache)

cHipSet

• Intel® NM10 Express Chipset
Graphics

• Intel® Graphics Media Accelerator 3650

• One VGA port

• One HDMI* port

• 24bpp dual-channel LVDS connector

• 2nd generation flat panel display (FPD) support
i/o controller

• Two SATA ports (fully shrouded)

• Two serial headers

• One parallel header
uSb 2.0

• Four external ports (two high-current / fast-charging

USB ports)

• Four ports via headers
Audio Solution

• 2+2-channel Intel® High Definition Audio

(with multi-streaming)

• Front-panel mic / headphone header

• AIO audio headers (for internal stereo speakers

and digital microphone)
10/100/1000 Network connection

• Intel® 82574L 10/100/1000 Mb/s Ethernet

Controller

For ordering information, visit www.intel.com
For the most current product information, visit

http://developer.intel.com/products/desktop/motherboard/

System resources and hardware (such as PCI and PCI Express*) require physical memory address locations that can reduce available addressable system memory. This could result in a reduction of as much

as 1 GB or more of physical addressable memory being available to the operating system and applications, depending on the system configuration and operating system.

Intel® High Definition Audio requires a system with an appropriate Intel® chipset and a motherboard with an appropriate codec and the necessary drivers installed. System sound quality will vary depending

on actual implementation, controller, codec, drivers, and speakers. For more information about Intel® HD Audio, refer to www.intel.com/design/chipsets/hdaudio.htm

Intel® Hyper-Threading Technology requires a computer system with a processor supporting HT Technology and an HT Technology-enabled chipset, BIOS, and operating system. Performance will vary depending

on the specific hardware and software you use. For more information including details on which processors support HT Technology, see www.intel.com/info/hyperthreading.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS

GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS

OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR

INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT.

   Intel products are not intended for use in medical, life-saving, or life-sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
   All products, dates, and figures specified are preliminary based on current expectations, and are subject to change without notice. Availability in different channels may vary.
   Actual Intel® Desktop Board may differ from the image shown.
   Intel, the Intel logo, Intel Atom, Intel Atom Inside, and Intel AppUp are trademarks of Intel Corporation in the U.S. and other countries.
  * Other names and brands may be claimed as the property of others.
   Copyright © 2011 Intel Corporation. All rights reserved. 0911/CLC/MS/PDF 325647-003US

Intel® Desktop Board DN2800MT Innovation Series

Technical Specifications

System bioS

• 8 Mb Flash EEPROM with Intel® Platform Innovation

Framework for EFI Plug and Play

• Advanced configuration and power interface

V2.0b, DMI 2.0

• Serial Peripheral Interface (SPI) Flash
fast boot bioS

• Optimized POST for almost instant-on access

to PC from power-on

SYSteM MeMorY

Memory capacity

• Single-channel DDR3 with two connectors for

1066 / 800 MHz memory support (4 GB

max)

Memory types

• DDR3 1066 / 800 SDRAM memory support

• Non-ECC Memory
Memory Voltage

• 1.8 V
Wake-up from Network

• Wired for Management (WfM) 2.0 compatible

• Support for system wake-up using onboard

network interface card with remote wake-up

capability
expansion capabilities

• One PCI Express* connector

• Two PCI Express Mini Card connectors

JuMperS ANd froNt pANeL coNNectorS

Jumpers

• Jumper: yellow

• Header: black

front-panel connectors

• Reset, HD LED, Power LEDs, power on/off, aux LED

• USB 2.0 headers

• Audio header

MecHANicAL

board Style

• Thin mini-ITX / microATX-compatible

(20mm z-height)

• 170mm x 170mm
baseboard power requirements

• DC connectivity via back-panel DC jack

(2.5mm / ID, 5.5mm / OD)

eNViroNMeNt

operating temperature

• 0°C to +50°C
Storage temperature

• -20°C to +70°C

reGuLAtioNS ANd SAfetY StANdArdS

united States

UL 60950-1
canada

CAN / CSA-C22.2 No. 60950-1
europe

(Low Voltage Directive 2006/95/EC)

EN 60950-1
international

IEC 60950-1

eMc regulations (Class B)

united States

FCC CFR Title 47, Chapter I, Part 15, Subparts A / B
canada

ICES-003
europe

(EMC Directive 2004/108/EC)

EN 55022 and EN 55024
Australia/New Zealand

EN 55022
Japan

VCCI V-3
South Korea

KN-22 and KN-24
taiwan

CNS 13438
international

CISPR 22
environmental compliance

europe

Europe RoHS (Directive 2002/95/EC)
china

China RoHS (MII Order # 39)