Asrock 939Dual-Sata2 939DUAL-SATA2 用户手册

产品代码

939DUAL-SATA2

2 0

2.8

Serial A

Serial ATTTTTA (SA

A (SA

A (SATTTTTA) Hard Disks Installation

A) Hard Disks Installation

This motherboard adopts JMicron JMB360 chipset that supports Serial ATAII

(SATAII) hard disk. It also adopts ULi M1567 south bridge chipset that supports

Serial ATA (SATA) hard disks, and supports RAID functions. You may install SATA

hard disks on this motherboard for internal storage devices. This section will

guide you to install the SATA hard disks.

STEP 1: Install the SATA hard disks into the drive bays of your chassis.

STEP 2: Connect the SATA power cable to the SATA hard disk.

STEP 3: Connect one end of the SATA data cable to the motherboard’s SATA

connector.

STEP 4: Connect the other end of the SATA data cable to the SATA hard disk.

1. If you plan to use RAID 0, RAID 1, or JBOD functions on SATA, SATA

HDDs must be operated in “RAID” mode.

2. “RAID” and “non-RAID” mode are options under “SATA Operation Mode” in

BIOS setup. Please refer to page 30 for details. They need different drivers

during actual operation.

2.9

Making a SA

Making a SATTTTTA Driver Disk

A Driver Disk

A Driver Diskette F

ette F

ette For SA

or SA

or SATTTTTA Operation in

A Operation in

“RAID” Mode

If you want to install Windows 2000, Windows XP, or Windows XP 64-bit OS on your

SATA HDDs, you will need to make a SATA driver diskette before you start the OS

installation.

STEP 1: Insert the ASRock Support CD into your optical drive to boot your system.

(Do NOT insert any floppy diskette into the floppy drive at this moment!)

STEP 2: During POST at the beginning of system boot-up, press <F11> key, and

then a window for boot devices selection appears. Please select CD-

ROM as the boot device.

STEP 3: When you see the message on the screen, “Do you want to generate

Serial ATA driver diskette [YN]?”, press <Y>.

STEP 4: Then you will see these messages,

Please insert a diskette into the floppy drive.

WARNING! Formatting the floppy diskette will

lose ALL data in it!

Start to format and copy files [YN]?

Please insert a floppy diskette into the floppy drive, and press <Y>.

STEP 5: The system will start to format the floppy diskette and copy SATA drivers

into the floppy diskette.