AMX FG2105-04 用户手册
N I - 2 1 0 0
D ATA S H E E T
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com
DIMENSIONS (HWD)
•
3 1/2” x 17” x 3 1/2” (8.8 cm x 43.2 cm x 8.8 cm)
•
RU: 2
WEIGHT
4.50 lbs (2.04 kg)
POWER
700 mA @ 12 VDC
ENCLOSURE
Metal with black matte finish
MEMORY
•
64 MB SDRAM
•
1 MB of Non-volatile SRAM
COMPACT FLASH
512 MB Compact Flash (upgradeable to 4 GB factory programmed)
ONBOARD MASTER
404 MIPS
CERTIFICATIONS
FCC Part 15 Class B, CE, and IEC 60950
FRONT PANEL COMPONENTS:
•
LINK/ACT: Green LED blinks when the Ethernet cables are connected and
terminated correctly. Also blinks when receiving Ethernet data packets
•
Status: Green LED blinks to indicate that the system is programmed and
communicating properly
•
Output: Red LED blinks when the Controller transmits data, sets channels and
sends data strings, etc.
•
Input: Yellow LED blinks when the Controller receives data from button
pushes, strings, commands, channel levels, etc.
•
RS-232/422/485 LEDs
•
Relay LEDs
•
IR/Serial LEDs
•
I/O LEDs
•
Rack-mount brackets: Provides an installation option for the Integrated
Controller to be mounted into an equipment rack, when used with the
Installation Kit (KA2105-01)
Installation Kit (KA2105-01)
REAR PANEL COMPONENTS
•
RS-232/422/485 (Ports 1 - 3)
•
ICSNet: Two RJ-45 connectors for ICSNet interface (provided by ICSNet
daughter card)
•
ICSHub Out: RJ-45 connector provides data to a Hub connected to the
Controller (provided by ICSNet daughter card)
•
Relay (Port 4)
•
Digital I/O (Port 9)
•
IR/Serial (Ports 5 - 8)
•
Program Port
•
Configuration DIP Switch: Sets the communication parameters for the
Program port
•
ID Pushbutton
•
Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show
communication activity, connection status, speeds, and mode information: -
SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps
and turns Off when the speed is 10 Mbps. - L/A (link/activity) - Green LED
lights On when the Ethernet cables are connected and terminated correctly,
and blinks when receiving Ethernet data packets.
SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps
and turns Off when the speed is 10 Mbps. - L/A (link/activity) - Green LED
lights On when the Ethernet cables are connected and terminated correctly,
and blinks when receiving Ethernet data packets.
•
AxLink LED: Green LED indicates the state of the AxLink port
•
AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector that provides data
and power to external control devices
•
Power Port: 2-pin 3.5 mm mini-Phoenix (male) connector
ENVIRONMENTAL
•
Operating Temperature: 0° C (32° F) to 50° C (122° F)
•
Operating Humidity: 20% to 85% RH
•
Heat Dissipation (Typical): 28.7 BTU/hr
INCLUDED ACCESSORIES
•
2-pin 3.5 mm mini-Phoenix (female) PWR connector (41-5025)
•
4-pin 3.5 mm mini-Phoenix (female) AxLink connector (41-5047)
•
6-pin 3.5 mm mini-Phoenix female I/O connector (41-5063)
•
8-pin 3.5 mm mini-Phoenix female Relay connector (41-5083)
•
Two CC-NIRC IR Emitters
•
Two removable rack ears (62-2105-06)
RECOMMENDED ACCESSORIES
•
PSN6.5 - 6.5 A Power Supply (F423-41)
•
PSN4.4 - 4.4 A Power Supply (F423-45)
•
NXA-ICSNET - NetLinx ICSNet Communication Network Card (FG2105-10)
•
NXA-CF2NI - CompactFlash Upgrade (FG21116-XX)
•
CC-232 - RS-232/422 Cables (FG10-752-04)
•
CC-NIRC - IR Cables (FG10-000-11)
NI-2100 Controller
(FG2105-04)
NI-2100/ICS Controller with ICSNET (FG2105-14)