Asrock 939NF4G-SATA2 用户手册
2 7
2 7
2 7
2 7
2 7
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency. The range is from 70MHz to
150MHz. The default value is [100].
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
CPU Spread Spectrum
This feature will be set to [Center Spread] as default. Configuration
options: [Disabled], [Center Spread], and [Down Spread].
PCIE Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
options: [Disabled], and [Enabled].
SATA Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
options: [Disabled], and [Enabled].
HT Spread Spectrum
This feature will be set to [Center Spread] as default. Configuration
options: [Disabled], [Center Spread], and [Down Spread].
Cool ‘n’ Quiet
Use this item to enable or disable AMD’s Cool ‘n’ Quiet
TM
technology.
Processor Maximum Multiplier
It will display Processor Maximum Multiplier for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Multiplier and Processor Voltage. However, it is recom-
mended to keep the default value for system stability.
BIOS SETUP UTILITY
CPU Configuration
Select Screen
Select Item
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
Select Screen
Select Item
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
CPU Frequency (MHz)
PCIE Frequency (MHz)
PCIE Frequency (MHz)
Overclock Mode
[200]
[100]
[100]
[Auto]
CPU Spread Spectrum
PCIE
SATA
HT
Cool' n' Quiet
PCIE
SATA
HT
Cool' n' Quiet
Spread Spectrum
Spread Spectrum
Spread Spectrum
[Center Spread]
[Enabled]
[Enabled]
[Center Spread]
[Enabled]
[Enabled]
[Enabled]
[Center Spread]
[Enabled]
Processor Maximum Multiplier
Processor Maximum Voltage
Processor Maximum Voltage
Memory Clock
Flexibility Option
Flexibility Option
Burst Length
Bank Interleaving
[Auto]
[4 Beats]
[Disabled]
[Auto]
[Auto]
x11
1.550 V
1.550 V
Boot Failure Guard
[Enabled]
Multiplier/Voltage Change
[Manual]
If AUTO, multiplier and
voltage will be left at the
rated frequency/voltage. If
Manual,
voltage will be left at the
rated frequency/voltage. If
Manual,
will be set based
on User Selection in Setup.
multiplier and
voltage
Processor Multiplier
Processor Voltage
Processor Voltage
[x8]
[1.500V]
[1.500V]
Processor Multiplier
This item will show when “Multiplier/Voltage Change” is set to [Manual];
otherwise, it will be hidden. You may set the value from [x8] up to [x25] but
no higher than the value of “Processor Maximum Multiplier”. For example, if