Asrock 939NF4G-SATA2 用户手册

3 1

BIOS SETUP UTILITY

IDE Configuration

Advanced

OnBoard IDE Controller

OnBoard SATAII Controller

SATAII Operation Mode

Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
SATAII 1
SATAII 2

[Both]

[Enabled]
[non-RAID]

[Hard Disk]
[Not Detected]
[ATAPI CDROM]
[Not Detected]
[Not Detected]
[Not Detected]

Select Screen
Select Item

Change Option

General Help

Load Defaults

F10

Save and Exit

ESC

Exit

Select Screen
Select Item

Change Option

General Help

Load Defaults

F10

Save and Exit

ESC

Exit

DISABLED: disables the
integrated IDE
Controller.
PRIMARY: enables only
the Primary IDE
Controller.
SECONDARY: enables
only the Secondary IDE
Controller.
BOTH: enables both IDE
Controllers.

3.3.4

3.3.4 IDE Configuration

IDE Configuration

OnBoard IDE Controller

You may enable either the primary IDE channel or the secondary IDE channel.

Or you may enable both the primary and the secondary IDE channels by

selecting [Both]. Set to [Disabled] will disable the both. Configuration options:

[Disabled], [Primary], [Secondary], [Both].

OnBoard SATAII Controller

Use this item to enable or disable the “OnBoard SATAII Controller” feature.

SATAII Operation Mode

Use this item to adjust SATAII Operation Mode. The default value of this

option is [non-RAID]. If you want to operate RAID function on SATA / SATAII

HDDs, please select [RAID].

IDE Device Configuration

You may set the IDE configuration for the device that you specify. We will

use the “Primary IDE Master” as the example in the following instruction,

which can be applied to the configurations of “Primary IDE Slave”, “Sec-

ondary IDE Master”, and “Secondary IDE Slave” as well.