Micron SSD 64GB MTFDDAA064MAM-1J1 用户手册
产品代码
MTFDDAA064MAM-1J1
Performance
Measured performance can vary for a number of reasons. The major factors affecting
drive performance are the density of the drive and the interface of the host. Additional-
ly, overall system performance can affect the measured drive performance. When com-
paring drives, it is recommended that all system variables are the same, and only the
drive being tested varies.
drive performance are the density of the drive and the interface of the host. Additional-
ly, overall system performance can affect the measured drive performance. When com-
paring drives, it is recommended that all system variables are the same, and only the
drive being tested varies.
Performance numbers will vary depending on the host system configuration.
Table 5: Drive Performance
Density
64GB
Unit
Interface Speed
6 Gb/s
Sequential read (128k transfer)
500
MB/s
Sequential write (128k transfer)
95
MB/s
Random read (4k transfer)
45K
IOPs
Random write (4k transfer)
20K
IOPs
Read latency
55
µs
Write latency
55
µs
PCMark vantage
65K
HDD score
Notes: 1. Typical I/O performance numbers as measured using IOMeter with a queue depth of 32
and write cache enabled.
2. IOMeter measurements are performed on an 8GB span.
3. 4k transfers used for READ/WRITE latency values.
4. System variations may affect measured results.
5. Performance numbers are indicative of C400 firmware version 0009 and newer.
3. 4k transfers used for READ/WRITE latency values.
4. System variations may affect measured results.
5. Performance numbers are indicative of C400 firmware version 0009 and newer.
C400v 1.8-Inch NAND Flash SSD
Performance
PDF: 09005aef84559b26
realssd_c400v_1_8.pdf - Rev. D 09/11 EN
realssd_c400v_1_8.pdf - Rev. D 09/11 EN
7
Micron Technology, Inc. reserves the right to change products or specifications without notice.
©
2011 Micron Technology, Inc. All rights reserved.