Ever Poweline 33 40kVA/32kW W/PWRLTO-3340K0/00 用户手册
产品代码
W/PWRLTO-3340K0/00
RS 232 AND USB COMMUNICATION
SNMP/HTTP NETWORK MANAGEMENT CARD
The EVER network management card is optional and can be installed by the user. It is a device that is used to
integrate the UPS with an Ethernet-type computer network. The network card is located in the special slot on
the back wall of the UPS. The network card enables the user to manage the UPS from any computer in the
network. This solution is most often used for central power supply, or if there is a need to manage the power
supply system remotely. The management card features the following services:
- SNMP agent enables power supply management with software called SNMP manager;
- HTTP server enables the UPS parameters display and modification using a WWW browser;
integrate the UPS with an Ethernet-type computer network. The network card is located in the special slot on
the back wall of the UPS. The network card enables the user to manage the UPS from any computer in the
network. This solution is most often used for central power supply, or if there is a need to manage the power
supply system remotely. The management card features the following services:
- SNMP agent enables power supply management with software called SNMP manager;
- HTTP server enables the UPS parameters display and modification using a WWW browser;
POWERLINE series units are equipped with extended management functions. There are two RS232 and
USB communication ports and PowerSoft Personal software provided with the UPS. It should be
remembered that only one port can be used at a time and to ensure communication it is necessary to connect
the UPS port to a free computer port with the provided connector. If the user wishes to use the RS232
standard for communication, the RS232 connector should be connected to the appropriate ports prior to
switching the computer and UPS on. Then, the UPS and computer should be switched on and the software
should be installed in line with the enclosed manual and following the installation application's instructions.
USB communication ports and PowerSoft Personal software provided with the UPS. It should be
remembered that only one port can be used at a time and to ensure communication it is necessary to connect
the UPS port to a free computer port with the provided connector. If the user wishes to use the RS232
standard for communication, the RS232 connector should be connected to the appropriate ports prior to
switching the computer and UPS on. Then, the UPS and computer should be switched on and the software
should be installed in line with the enclosed manual and following the installation application's instructions.
EPO
EPO (Emergency Power Off) is a mechanism that cuts off the energy supply to receivers at the UPS output in
extreme situations (e.g. a fire).
extreme situations (e.g. a fire).
The mechanism can be activated
in two ways:
- disconnected pins of the external EPO connector,
- manual command on the interface (KONTROLA 1/4; AwaryjneWylaczenie).
Voltage will be connected at the output after the user cancels the alert flag manually
and sets the release device as inactive (normal position) - in case of the external initiation of the release
device.
- disconnected pins of the external EPO connector,
- manual command on the interface (KONTROLA 1/4; AwaryjneWylaczenie).
Voltage will be connected at the output after the user cancels the alert flag manually
and sets the release device as inactive (normal position) - in case of the external initiation of the release
device.
It is possible to temporarily lock the EPO function during the assembly of the EPO release device. Then, the
technician can remove the EPO connector without risking a black out of the receiver devices. The entire
operation can last up to 1 minute, starting from the setting of the flag. After that time, the lock is automatically
technician can remove the EPO connector without risking a black out of the receiver devices. The entire
operation can last up to 1 minute, starting from the setting of the flag. After that time, the lock is automatically
The unit switches to EMERGENCY mode.
The unit is equipped with a manual BYPASS line switch, which enables the direct switching of the BYPASS
line to connect it to the output clips of the unit and bypassing the unit blocks.
line to connect it to the output clips of the unit and bypassing the unit blocks.
MANUAL BYPASS
NOTE! A connected SNMP card disables communication through RS232, USB,
and PowerSoft Personal.
and PowerSoft Personal.
!
10-33, 20-33, 30-33, 40-33, 50-33
EVER Sp. z o.o. ul. Grudziñskiego 30, 62-020 Swarzêdz
tel. 0048 61 6500 400, fax 0048 61 6510 927, e-mail: ups@ever.com.pl
POWERLINE 3-3