Fluke LinkRunner LRAT-1000 数据表
产品代码
LRAT-1000
TruePower™ PoE Loading
Verify you are receiving the required current and voltage up to 25.5W to power your PoE
enabled devices. The LinkRunner TruePower PoE loading draws actual power to verify that
your PoE enabled devices will have the required power to function.
Verify you are receiving the required current and voltage up to 25.5W to power your PoE
enabled devices. The LinkRunner TruePower PoE loading draws actual power to verify that
your PoE enabled devices will have the required power to function.
AutoTest
Verify enterprise connectivity in seconds with AutoTest. Standardize your set of critical
network tests in profiles to run every time. Tests include:
Verify enterprise connectivity in seconds with AutoTest. Standardize your set of critical
network tests in profiles to run every time. Tests include:
PoE (copper only) class
Link speed and duplex(actual and advertised)
RX pair and polarity
802.1x authentication
Switch name, port, VLAN, model and IP
DHCP auto-negotiation with subnet and DHCP server addresses
IPv4 and IPv6 availability
Ping and TCP port connectivity with lost and min, max and average speed
Link speed and duplex(actual and advertised)
RX pair and polarity
802.1x authentication
Switch name, port, VLAN, model and IP
DHCP auto-negotiation with subnet and DHCP server addresses
IPv4 and IPv6 availability
Ping and TCP port connectivity with lost and min, max and average speed
Ping and TCP Port Connectivity
Verify connectivity to key devices with ping and TCP connectivity testing. Devices
automatically include a router, DNS server and DHCP server. Configure 10 additional devices
to meet your requirements by URL or IPv4/ IPv6 address and optional application port
number.
Verify connectivity to key devices with ping and TCP connectivity testing. Devices
automatically include a router, DNS server and DHCP server. Configure 10 additional devices
to meet your requirements by URL or IPv4/ IPv6 address and optional application port
number.
Reflector
The LinkRunner packet reflector mode allows it to be used as a remote device during
throughput tests to validate LAN and WAN throughput capabilities. LinkRunner AT supports
packet reflection for:
The LinkRunner packet reflector mode allows it to be used as a remote device during
throughput tests to validate LAN and WAN throughput capabilities. LinkRunner AT supports
packet reflection for:
OptiView XG Network Analysis Tablet
OneTouch
OneTouch
™
AT Network Assistant
EtherScope
™
Network Assistant
MetroScope
™
Service Provider Assistant
4 of 8