Tripp Lite SR45UBDPWDC 用户手册

SR45UBDPWDC Rack Enclosure

(4) Side panels

(4) Side panel locks

(2) Side panel keys

(50) M6 screws

(50) M6 cage nuts

(50) M6 washers

(1) Allen Wrench

Owner's Manual

Ships fully assembled for rapid deployment and roll into place on pre-installed casters (casters are removable)

 Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index

ensures consistent rail placement without requiring time-consuming measurements.

 Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable

managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can

accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure).

 Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws

 Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.

 Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer

requirements.

 Maximum usable internal depth of 42 inches (front to rear rail).

 Weight ratings of 3000 lb stationary and 2250 lb rolling.

 Combo locks are installed on the front and rear doors

 Front door is reversible and removable

 Split rear door design reduces clearance requirements for service entry allowing the enclosure to be placed closer to a wall.

 Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing. Two side

panels per side (4 panels total)

 Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 750mm or 30".

 Leveling feet extend to allow enclosure to be positioned on uneven floors. Levelers are removable.

 Convenient grounding system. All components are grounded to the enclosure frame which includes multiple connections for facility ground.

Front and rear doors include quick-release ground wires.

 Open bottom for cable access.

 Top panel has generous cable access holes. Panel can be removed toollessly in seconds without having to disconnect cables first.

 Included stabilizing brackets are used for shipment and can be reattached at the bottom of the enclosure frame on the inside or outside of

the rack.

 Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) Compliance

 Compatibility with airflow optimization accessories as well as cable management accessories.

42

4

45U

420

191

EXTERNAL DIMENSIONS: 83.75 x 29.53 x 47.25

90.25 x 32 x 52.75