Asrock 775XFire-eSATA2 775XFIRE-ESATA2 用户手册
产品代码
775XFIRE-ESATA2
2 0
2 0
2 0
2 0
2 0
DVI-DMS cable
DMS connector
DVI connector
You are allowed to install two CrossFire
TM
Edition graphics cards to both slots,
or you may use one CrossFire
TM
Edition graphics cards and a compatible
standard Radeon (CrossFire
TM
Ready) graphics card from the same series.
Step 2.
Install the standard Radeon (CrossFire
TM
Ready) graphics card to AGI Ex-
press slot (PCI Express x 4). For the proper installation procedures, please
refer to section “Expansion Slots”.
Step 3.
Install the Radeon CrossFire
TM
Edition graphics card to PCI Express x 16
slot. For the proper installation procedures, please refer to section “Expan-
sion Slots”.
Connect the DVI-DMS
cable to DVI connector of
the compatible standard
Radeon (CrossFire
TM
Ready) graphics card.
Standard Radeon
(CrossFire
TM
Ready)
graphics card
Standard Radeon
(CrossFire
TM
Ready)
graphics card
Radeon CrossFire
TM
Edition graphics card
DVI connector
Standard Radeon (CrossFire
TM
Ready)
graphics card
There are two DVI connectors on the
standard Radeon (CrossFire
TM
Ready)
graphics card. Please connect the DVI-DMS
cable to the correct DVI connector; otherwise
, the graphics card will not work.
Step 4.
Correctly connect the DVI-DMS cable to the monitor connector and two
graphics cards that you install. (If you install two standard Radeon
(CrossFire
TM
Ready) graphics cards to this motherboard, please skip this
step.)