Asrock 775XFire-eSATA2 775XFIRE-ESATA2 用户手册

产品代码

775XFIRE-ESATA2

3 2

2.13

2.13 Serial A

Serial A

Serial ATTTTTA (SA

A (SA

A (SATTTTTA) / Serial A

A) / Serial A

A) / Serial ATTTTTAII (SA

AII (SA

AII (SATTTTTAII) Hard Disks

AII) Hard Disks

Installation

This motherboard adopts Intel ICH7R south bridge chipset that supports Serial ATA

(SATA) / Serial ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID 10, RAID

5, and Intel Matrix Storage) functions. You may install SATA / SATAII hard disks on

this motherboard for internal storage devices. This section will guide you to install

the SATA / SATAII hard disks.

STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.

STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.

STEP 3: Connect one end of the SATA data cable to the motherboard’s SATAII

connector.

STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard

disk.

1. If you plan to use RAID 0, RAID 1, or Intel Matrix Storage function, you

need to install at least 2 SATA / SATAII hard disks. If you plan to use

RAID 5 function, you need to install at least 3 SATA / SATAII hard disks.

If you plan to use RAID 10 function, you need to install at least 4 SATA /

SATAII hard disks. If you install 2 eSATAII devices, then only RAID 0,

RAID 1, or Intel Matrix Storage functions will be enabled.

2. It is not recommended to switch the “Configure SATA as” setting between

AHCI, RAID, and IDE mode after OS installation.