Alcatel-Lucent OmniAccess AP70 OAW-AP70 产品宣传页
产品代码
OAW-AP70
O R D E R I N G I N F O R M A T I O N
PART NUMBER
DESCRIPTION
OAW-AP70
OmniAccess AP70 access point with integral antenna and quad RP-SMA external antenna connectors (2.4 GHz and 5 Ghz bands with
diversity). Supports 802.11a and 802.11b/g. Supports two 10/100BaseT (RJ-45) Ethernet interfaces (one with power and serial-over-
Ethernet and one with power-over-Ethernet capability) and one USB2.0 interface. Includes an Installation Guide. If required, an external
antenna shall be ordered separately. When no power over Ethernet is available, an external Power Adapter Kit shall be ordered separately.
diversity). Supports 802.11a and 802.11b/g. Supports two 10/100BaseT (RJ-45) Ethernet interfaces (one with power and serial-over-
Ethernet and one with power-over-Ethernet capability) and one USB2.0 interface. Includes an Installation Guide. If required, an external
antenna shall be ordered separately. When no power over Ethernet is available, an external Power Adapter Kit shall be ordered separately.
www.alcatel-lucent.com
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other
trademarks are the property of their respective owners. Alcatel-Lucent assumes no responsibility for
the accuracy of the information presented, which is subject to change without notice.
© 2007 Alcatel-Lucent. All rights reserved. P/N 031916-00 Rev. B 3/07
trademarks are the property of their respective owners. Alcatel-Lucent assumes no responsibility for
the accuracy of the information presented, which is subject to change without notice.
© 2007 Alcatel-Lucent. All rights reserved. P/N 031916-00 Rev. B 3/07
Physical
• Height (antenna retracted):
6.57 in. (167 mm)
• Height (antenna extended):
11.54 in. (293 mm)
• Width: 7.48 in. (190 mm)
• Depth: 1.18 in. (30 mm)
• Weight: 18 oz. (510 g)
Electrical Interfaces
• 2 x 10/100BaseTX RJ-45
auto-sensing Ethernet
interfaces: (Port 0)
interfaces: (Port 0)
¬ Auto-sensing MDI/MDX
¬ PoE 48V DC / 250mA power
over Ethernet (802.3af com
plant)
plant)
¬ Serial over Ethernet (Port 1)
¬ Auto-sensing MDX
¬ PoE 48V DC / 250mA power
over Ethernet (802.3af
complant)
complant)
• Redundant Ethernet data link
and power over Ethernet
• USB ver2.0 interface
• 1 x 5V DC power interface
Mechanical Interfaces
• Standard Kensington MicroSaver
security cable interface (not
supplied)
supplied)
• Optional wall and ceiling mount
kit interface
Visual Indicators (LEDs)
• (Ready) Power on/off
• (Ethernet) link status / activity
• (Radio mode) 802.11a and b/g
AP /air monitor mode
Requirements
• External AC power or POE
• 5V DC / 2A supplied externally
via optional country specific AC
adapter kits
adapter kits
• 48V DC / 200mA power over
Ethernet (802.3af compliant)
Power Requirements
• External AC power or POE
• 5V DC / 3A supplied externally
via optional country specific AC
adapter kits
adapter kits
• 48V DC / 250mA power over
Ethernet (802.3af compliant)
Environmental
• Temperature
¬ Operating: 32 to 122º F (0 to
50º C)
¬ Storage: 32 to 158º F (0 to
70ºC)
• Humidity 5% to 95%
(non-condensing)
Standards
• Ethernet IEEE 802.3 / IEEE
802.3u
• Power over Ethernet IEEE
802.3af
• Wireless IEEE 802.11a/b/g
• USB 2.0
Safety
• UL Listed (UL60950)
• UL Listed (Canadian Electrical
Code/CSA 22.2 No. 60950)
• EN60950 / IEC60950
• National Electrical Code Section
300-22(C)
• Canadian Electrical Code, Part 1,
CSA C22.1 Sections 2-128,
12-010(3), and 12-100
12-010(3), and 12-100
• UL2043 plenum rating
Electromagnetic
Compliance
Compliance
• FCC Part 15 Class B
• FCC Part 15 Class C
15.207/15.247
• FCC Part 15 Class E 15.407
• ICES- 003 Class A
• RSS 210 (CAN)
• VCCI Class A
• EN 61000-3, EN 61000-4-2, EN
61000-4-3, EN 61000-4-4
• EN 61000-4-5, EN 61000-4-6,
EN 61000-4-8, EN 61000-4-11
• 73/23/EEC and 89/336/EEC
• EN 55022, EN55024
(89/336/EEC)
• ETS 300 328 (89/336/EEC), ETS
301 489 (89/336/EEC)
• AS/NZS 3548 Class A
• RFS 29 (NZ)