Intel G555 BX80623G555 用户手册
产品代码
BX80623G555
Datasheet, Volume 2
253
Processor Configuration Registers
2.18.30 FRCDH_REG—Fault Recording High Register
This register records fault information when primary fault logging is active. Hardware
reports the number and location of fault recording registers through the Capability
register. This register is relevant only for primary fault logging.
reports the number and location of fault recording registers through the Capability
register. This register is relevant only for primary fault logging.
This register is sticky and can be cleared only through power good reset or by software
clearing the RW1C fields by writing a 1.
clearing the RW1C fields by writing a 1.
B/D/F/Type:
0/0/0/GFXVTBAR
Address Offset:
208–20Fh
Reset Value:
0000_0000_0000_0000h
Access:
RO, RW1CS, ROS-V
Size:
64 bits
BIOS Optimal Default
0000_0000_0000_0000h
Bit
Attr
Reset
Value
RST/
PWR
Description
63
RW1CS
0b
Powerg
ood
Fault (F)
Hardware sets this bit to indicate a fault is logged in this Fault
Hardware sets this bit to indicate a fault is logged in this Fault
Recording register. The F field is set by hardware after the details
of the fault is recorded in other fields.
When this bit is set, hardware may collapse additional faults from
When this bit is set, hardware may collapse additional faults from
the same source-id (SID).
Software writes the value read from this field to clear it.
Software writes the value read from this field to clear it.
62
ROS-V
0b
Powerg
ood
Type (T)
Type of the faulted request:
0 = Write request
Type of the faulted request:
0 = Write request
1 = Read request or AtomicOp request
This field is relevant only when the F field is Set, and when the fault
This field is relevant only when the F field is Set, and when the fault
reason (FR) indicates one of the DMA-remapping fault conditions.
61:60
RO
00b
Uncore
Address Type (AT)
This field captures the AT field from the faulted DMA request.
Hardware implementations not supporting Device-IOTLBs (DI field
This field captures the AT field from the faulted DMA request.
Hardware implementations not supporting Device-IOTLBs (DI field
clear in Extended Capability register) treat this field as RsvdZ.
When supported, this field is valid only when the F bit is set, and
When supported, this field is valid only when the F bit is set, and
when the fault reason (FR) indicates one of the DMA-remapping
fault conditions.
59:40
RO
0h
Reserved
39:32
ROS-V
00h
Powerg
ood
Fault Reason (FR)
This field is relevant only when the F bit is set.
This field is relevant only when the F bit is set.
31:16
RO
0h
Reserved
15:0
ROS-V
0000000
0000000
00b
Powerg
ood
Source Identifier (SID)
Requester-id associated with the fault condition.
This field is relevant only when the F bit is set.
Requester-id associated with the fault condition.
This field is relevant only when the F bit is set.