TP-LINK TL-WA750RE 用户手册

下载
页码 47
TL-WA750RE 
150Mbps Universal WiFi Range Extender User Guide 
 
21 
 
Wireless Name of Root AP - The SSID of the AP your device is going to connect to as a 
client. You can also use the search function to select the SSID to join.   
 
MAC Address of Root AP - The BSSID of the AP your device is going to connect to as a 
client. You can also use the search function to select the BSSID to join.   
 
Region - Select your region from the drop-down list. This field specifies the region where the 
wireless function of this device can be used. It may be illegal to use the wireless function of 
this device in a region while you chose a different region in the drop-down list. If your country 
or region is not listed, please contact your local government agency for assistance.   
 
Note:
 
The default region is United Kingdom. When you select your local region from the pull-down 
list, the dialog shown in Figure appears below. Click 
OK
 
Note Dialog   
 Note:
 
Restricted by local law regulations, version for North America does not have region selection 
option.
 
 
Mode  -  If all of the wireless devices connected with this device can connect in the same 
transmission mode (eg. 802.11b), you can choose "Only" mode (eg. 11b only). If you have 
some devices that use a different transmission mode, choose the appropriate "Mixed" mode.   
 
Channel Width - The bandwidth of the wireless channel.   
 
Max Wireless Rate - You can limit the maximum wireless rate of the device through this field.   
To apply any settings you have altered on the page, please click the 
Save button, and then you 
will be reminded to reboot the device. 
4.6.2  Wireless Security 
Selecting 
Wireless Wireless Security will enable you to configure wireless security for your 
wireless network to protect your data from intruders. The Range Extender provides two security 
types: WEP  and WPA/WPA2-Personal. Wireless security can  be set on the following screens. 
Since the configurations are almost the same in either operation mode, here we just take that in 
Range Extender mode 1 for example.