TP-LINK TL-WA830RE 用户手册

 

4.  Configure the IP address manually. 

1) Select 

Use the following IP address. 

2)  Enter 192.168.0.* (* is any integer between 1 to 253) into the IP address filed, 

255.255.255.0 into the Subnet mask filed and 192.168.0.254 into the Default gateway 
filed. 

3) Click 

OK to keep your settings. 

 

Figure 3-4 

5.  Verify the network connection between your PC and the AP via the Ping command. The 

following example is in Windows XP Operating System. 

1) Click 

Start > Run tab. Enter cmd in the filed and click OK. 

2) Type 

ping 

192.168.0.254 on the screen that displays and then press Enter. 

If the result displayed is similar to that shown as Figure 3-5 below, the connection 
between your PC and the AP has been successfully established. 

 

Figure 3-5 

 

8