TP-LINK TL-WR 841 ND 用户手册
300Mbps Wireless N Router
TL-WR841N/TL-WR841ND
-5-
1.4.2
The Rear Panel
Figure 1-2 Rear Panel sketch
The following parts are located on the rear panel (View from left to right).
¾
ON/OFF: The switch for the power.
¾
POWER: The Power socket is where you will connect the power adapter. Please use the
power adapter provided with this TL-WR841ND 300Mbps Wireless N Router.
¾
WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet.
¾
1,2,3,4 (LAN): These ports (1,2,3,4) connect the Router to the local PC(s).
¾
WPS/RESET: This button is used for both WPS and Reset function. To use the WPS
function, press it for less than five seconds; to use the RESET function, press it for more
than five seconds.
z
Used as RESET button:
There are two ways to reset to the Router's factory defaults:
1) Use the Factory Defaults function on System Tools -> Factory Defaults page in the
Router's Web-based Utility.