Transcend Information TS4GMP630 用户手册

下载
页码 64
16 
Record using the Built-In Microphone 
1. 
Unless otherwise selected, Pressing and Holding the “A-B/REC” button 
 for more than 2 
seconds in any mode except the RADIO Mode will begin an audio recording using the MP630’s 
Built-in Microphone. 
2. 
A Recording file is generated and will appear on the screen; this file is saved in the RECORD Mode in 
the [/MICIN.DIR/] folder. 
 
3. 
Files Recorded using the Built-in Microphone are named in the order [Month/DayM001.WAV], then 
[Month/DayM002.WAV]
 and so forth. 
4. 
Pressing the “PLAY/PAUSE/PWR ON-OFF” button 
 during a recording will Pause the 
recording, pressing the “PLAY/PAUSE/PWR ON-OFF” button 
 again will resume the 
recording. 
5. 
Press the “A-B/REC” button 
  for more than 2 seconds during a recording to stop the recording 
and the screen will return to the RECORD Mode. 
6. 
Recorded audio files can be accessed in the RECORD Mode, or by using the File Navigator
Sample 
rate 
Channels 
1GB 2GB 4GB 
 
RECORD Functions 
 
Low (8KHz) 
1 (mono) 
64 hrs 
128 hrs 
256 hrs 
Avg (16KHz) 
1 (mono) 
32 hrs 
64 hrs 
128 hrs 
Med (22KHz) 
1 (mono) 
24 hrs 
48 hrs 
96 hrs 
Good (32KHz) 
1 (mono) 
16 hrs 
32 hrs 
64 hrs 
Record 
Sound 
High (44KHz) 
1 (mono) 
12 hrs 
24 hrs 
48 hrs 
 
If not enough memory space is available, or the battery power is too low, the MP630 cannot support 
the maximum recording capacity as outlined in the above table. 
 
The closer you move the MP630’s Microphone to the source of the sound the higher the quality of the 
recording. 
Record using the External Microphone 
1. 
In the REC INPUT DEVICE Mode select Ext MIC (External Microphone) as the recording device. 
2. 
Plug an External Microphone into the MP630’s Line-In port. 
3. 
Press and Hold the “A-B/REC” button 
  for more than 2 seconds to begin an audio recording 
using the External Microphone
4. 
A Recording file is generated and will appear on the screen; this file is saved in the RECORD Mode in 
the [/MICIN.DIR/] folder.