Transcend Information TS4GMP630 用户手册

If a problem occurs with your MP630, please first check the information listed below before taking your 
MP630

 for repair. If you are unable to remedy a problem from the following hints, please consult your 

dealer, service center, or local Transcend branch office. We also have FAQ and Support services on our 
websites. 

®

Go to the Device Manager in the Control Panel and enable the Auto-Insert function for the CD-ROM 
drive. Alternatively, you can manually run the “MP630.EXE” file on the software CD. 

Check the following: 

Is your MP630 properly connected to the USB port? If not, unplug it and plug it in again. 

Is your MP630 connected to the Mac keyboard? If yes, unplug it and plug it into an available USB port 
on your Mac Desktop. 

Is the USB port enabled? If not, refer to the user’s manual of your computer (or motherboard) to 
enable it. 

Check the following: 

Is the MP630 connected to your computer? If yes, unplug it. 

Is the LOCK switch set to “LOCK”? If yes, set it to the “OFF” position. 

Is the battery out of power? If yes, please recharge the battery. 

, or WAV files to the MP630 

As required, uninstall and re-install the driver. If this doesn’t work, try Resetting the unit and if this fails, 
please see the “

” section to recover your MP630. 

Is the LOCK switch set to “LOCK”? If yes, set it to the “OFF” position. 

52