Troy-Bilt 12168 用户手册

下载
页码 24
Section
5
Maintenance
NOTE: All references to left, right,
front and rear of the machine are
determined by standing behind the
handlebar and facing the direction of
forward travel.
Subjects covered in this section
include: 
• 
Tiller/Cultivator Maintenance
• Engine Maintenance
• Storing your Equipment
REQUIRED MAINTENANCE SCHEDULE
Before Every  Every 
As
PROCEDURE
Each
10
25
Noted
Use
Hours
Hours
Check engine oil level
And every 5
operating hours
Test Operational Interlock
See Section 4
Safety System
Check drive belt tension
After initial
2 hours
Check nuts and bolts
After initial 
2 hours
Clean tiller tine shaft
Lubricate tiller
Change engine oil
*
Every 50 oper-
ating hours 
***
Clean foam element air filter
More often in 
Check paper element air filter
dusty, dirty areas
Check for oil leaks
After initial
2 hours
Check gear oil level in 
• 
**
the transmission
Check tines for wear
Check air pressure in tires
Annually, at
start of season
Lubricate eccentric pivot bushings
And at end of
tilling season
*   During engine break-in period, change engine oil after first 2 hours of operation.
** Check transmission gear oil level every 25 hours and at beginning of tilling season 
if any leakage is observed.
*** More often under dirty or dusty conditions.
WARNING
Before inspecting, cleaning
or servicing the machine,
shut off engine, wait for all
moving parts to come to a
complete stop, disconnect
spark plug wire and move
wire away from spark plug.
Failure to follow these
instructions can result in
serious personal injury or
property damage.
19