Britax 85 SICT 用户手册
22
23
LATCH – Short Path
Before you begin:
9
Check that your vehicle has LATCH anchors.
* Check your vehicle owner’s manual for the vehicle’s LATCH
anchor limits.
9
Check that your vehicle has a top tether anchor.
* Britax recommends that the Versa-Tether is used at all times.
Using the tether will improve the stability of the child seat and
reduce the risk of injury. Check your vehicle owner’s manual for
tether anchor locations.
9
Remove the Versa-Tether
®
hook from the storage clip and
place it over the child seat back to keep it from becoming
pinned between the child seat and vehicle seat during
installation.
Versa-Tether
(Top Tether)
Install with LATCH using only the short belt path as shown
above.
1
Locate the LATCH anchors in
your vehicle.
* Ensure harness height is
adjusted to fit your child.
2
Rotate the positioning block to
the front and place the child
seat on the vehicle seat.
3
Verify that the LATCH strap is
not twisted and firmly press
the LATCH connectors onto
their adjacent LATCH anchors
to attach.
4
Push the child seat into the
vehicle seat and pull the end
of the LATCH strap through
the belt slot to secure.
* The child seat is secure when it
cannot be moved front-to-back
or side-to-side more than 1 in.
(2.5 cm) at the belt path. If the
child seat is not secure, repeat
the installation procedure or
use a different seating location.
5
Firmly press the Versa-Tether
®
hook to the vehicle tether
anchor to attach. Remove all
slack from the tether webbing.
6
Use the elastic strap to
contain extra webbing.
1
2
OR
OR
Checklist
9
Check that positioning block is rotated to the front.
9
Check all connections and verify that child seat is secure.
* The child seat is secure when it cannot be moved front-to-
back or side-to-side more than 1 in. (2.5 cm) at the belt path.
If the child seat is not secure, repeat the installation procedure
or use a different seating location.
9
Ensure any excess Versa-Tether
®
webbing is stored in elastic
band. Always ensure any excess webbing is contained within
your vehicle.
Installing the Child Seat: Harness Mode
Installing the Child Seat: Harness Mode