Britax 85 SICT 用户手册

Care and Maintenance

Cleaning the Cover
• HAND WASH the cover using cold water and mild soap.
• LINE DRY to prevent the cover from shrinking.

• DO NOT:

* Bleach

* Machine wash

* Machine dry

* Iron

Cleaning the Harness
• SPONGE CLEAN the harness using warm water and mild soap.
• TOWEL DRY

• DO NOT:

* Disassemble the harness

* Bleach

* Machine wash

* Machine dry

* Iron

Cleaning the Shell
• SPONGE CLEAN the shell using warm water and mild soap.
• TOWEL DRY

• DO NOT use abrasive cleaners

Replacing the Cover

Fit the cover around the head

restraint.

* Be careful not to damage the

energy-absorbing foam.

Fit the bottom of the cover

over the lower part of the child

seat shell, then pull the elastic

loops over the hook on the

bottom of the child seat shell.

Push the cover under the

lower belt guides.

Replace the screw to lock the

head restraint adjuster.

Pull the head restraint cover

over the head restraint shell,

and reattach the elastic bands.

* Be careful not to damage the

energy-absorbing foam.

Move the harness adjuster to

the highest position (a), then

move the head restraint to the

lowest position (b).

* Ensure that harness slots in

the cover, head restraint and

harness adjuster are aligned.

Cleaning the Side Impact Cushions
• SPONGE CLEAN the cushion using warm water and mild soap.

• TOWEL DRY

• DO NOT use abrasive cleaners

Pull the cover fabric tight and

slide it between the child

seat shell and Side Impact

Cushion.

Pull the buckle through the

slot in the cover.

* Ensure that the buckle is

through the correct cover

slot for the buckle position.

WARNING:

Prevent the Side Impact Cushions from

being punctured. Puncture damage will cause the cushions not

to perform as intended.