Britax Roundabout 用户手册

Child Seat Functions

How to Adjust Harness Slot Height

IMPORTANT:

See Important Harness Adjustments

on pages 6 – 7 for important instructions on proper

harness fit based on your child’s height and weight.

Loosen the harness by pressing the harness-

adjuster button while pulling the shoulder

straps forward as far as possible (Fig. A).

From the rear of the child seat, unhook the

shoulder harness from the harness yoke (Fig. B).

Pull straps through the shell, foam, and cover

to the front of the child seat.

Thread the harness straps through the

appropriate harness slots in the cover, foam,

and child seat shell (Fig. C).

Reattach harness straps to the harness yoke

(Fig. B).

Pull harness-adjuster strap to tighten the

harness.

Verify all straps are threaded at the same height

and are not twisted.

Securing Your Child

Once the child seat has been installed in the

vehicle and adjustments have been made,

follow these instructions to secure the child.

Loosen the harness by pressing the adjuster

button located on the front of the child seat,

then pull the shoulder straps forward (Fig. A).

Release the chest clip by squeezing the tabs

and sliding pieces apart (Fig. D).

Unfasten the harness buckle by pressing the release button and

sliding the tongues out.

Move the harness straps to the side of the child

seat. Use the harness holder located on the

straps and side of the cover to aid in holding

the straps.

Place child in the child seat.

Position the harness straps around the child

and fasten the harness buckle (Fig. E) and chest

clip (Fig. F).

Proper connection of the harness buckle is

confirmed with a positive click after inserting

each buckle tongue.

Gently pull up on the harness straps to tighten

the lap section of the harness, which should fit

low on the child’s body.

Slowly pull the adjuster strap to tighten the

harness around the child (Fig. G).

Position the chest clip at the middle of the

child’s chest, level with the armpits (Fig. H).

Verify that harness is not twisted and child is

properly secured.

IMPORTANT:

Always pull on the harness after securing the child to

ensure the buckle tongues are secure in the harness

buckle. If the buckle will not fasten with a positive

click after insertion of each buckle tongue, the harness

buckle or adjuster area may be clogged with food, drink

or other debris that need to be removed. See page 37

for cleaning instructions.

Adjust the belts provided with this child seat so they fit

snugly around your child. A snug strap should not allow

any slack. It lies in a relatively straight line without

sagging. It does not press on the child’s flesh or push the child’s body into an
unnatural position.

•