Amana SBD21VL 用户手册

16

To avoid electrical shock which can cause severe
personal injury or death, disconnect power to
refrigerator before replacing light bulb. After replacing
light bulb, connect power.

To avoid personal injury or property damage, observe
the following:
• Allow light bulb to cool.
• Wear gloves when replacing light bulb.

Upper refrigerator and non dispensing models
freezer section
• Remove light bulb cover by removing ¼" (6 mm) hex

nut screws. Replace bulb with 40-watt appliance bulb.

• Replace light bulb cover by replacing ¼" (6 mm) hex

nut screws.

A

B

A.

Light bulb cover

B.

Light bulb

Upper refrigerator light bulb removal

(Some models)

• Remove light bulb cover by removing screw. Replace

bulb with 40-watt tubular bulb.

• Replace light bulb cover by placing cover over light

bulb. Insert and tighten screw.

A

B

C

A.

Light bulb

B.

Light bulb cover

C.

Screw

Lower refrigerator light bulb removal

Freezer section
1.

Remove ice bucket by lifting bucket and pulling out.

2.

Remove light bulb cover by removing screw. Replace
bulb with 40-watt appliance bulb.

3.

Replace light bulb cover by holding cover in place over
light bulb.  Insert and tighten screw.

4.

Replace ice bucket by sliding in until bucket locks in
place.

A

B

A.

Light bulb cover

B.

Light bulb

Freezer section light bulb removal

(Some models)

Light bulb is located between dispenser arms.
• Remove light bulb by unscrewing light bulb. Replace

light bulb with a 6-watt, 120-volt bulb.

• Replace light bulb by inserting and tightening bulb.

Dispenser light bulb replacement