Konica Minolta bizhub C652DS 用户手册

bizhub C652/C652DS/C552/C552DS/C452

7-18

Adjust the horizontal position of the punched holes for each paper size.

0

Before making any adjustments, create a sample using the punch settings. Adjust the center staple 
position while checking the created sample.

0

This adjustment is available if the Z Folding Unit is installed.

Select [Utility/Counter] ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö 
[Finisher Adjustment] ö [Horizontal Punch (Z-Fold) Position Adjustment].

Press [+] or [-] to adjust the punched hole position while checking the sample.

Press [OK].

Create a sample, and check the print result.

Adjust the first paper folding position for each paper size when using the Z-fold function. 

0

Before making any adjustments, create a sample using the Z-fold function. Adjust the center staple 
position while checking the created sample.

0

This adjustment is available if the Z Folding Unit is installed.

Select [Utility/Counter] ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö 
[Finisher Adjustment] ö [1st Z-Fold Position Adjustment].

While checking the sample, press [+] or [-] to adjust the first folding position.

Press [OK].

Create a sample, and check the print result.

1st Z-Fold Position