Roberts Gorden Caribe CGTH-30 用户手册
SECTION 2: I
NTRODUCTION
9
2.10 Where Can the Heater Be Installed?
The CGTH-Series heater is intended for installation
in the following areas:
in the following areas:
• Residential applications, such as:
- garages
- hobby greenhouses
- workshops
- hobby greenhouses
- workshops
• Light industrial/commercial applications, such
as:
- entranceways
- lobby areas
- lunch rooms
- aircraft hangars (See Page 11, Section 3.5.1
for restrictions)
- public garages (See Page 11, Section 3.5.2
for restrictions)
- entranceways
- lobby areas
- lunch rooms
- aircraft hangars (See Page 11, Section 3.5.1
for restrictions)
- public garages (See Page 11, Section 3.5.2
for restrictions)
2.11 Where Can't the Heater Be Installed?
The CGTH-Series heater is not intended for instal-
lation in the following areas:
lation in the following areas:
• Residential living or sleeping areas
• Basements
Due to high temperatures, ensure that the heater
area is kept clear of furniture, draperies, clothing
or other combustible materials. Children and
adults should be alerted to the hazard of high
surface temperatures and should stay away to
avoid burns and clothing ignition. Young children
should be carefully supervised when they are in
the same room as the heater.
area is kept clear of furniture, draperies, clothing
or other combustible materials. Children and
adults should be alerted to the hazard of high
surface temperatures and should stay away to
avoid burns and clothing ignition. Young children
should be carefully supervised when they are in
the same room as the heater.
2.12 Installer's Responsibility
The CGTH-Series heater, the gas and electrical sup-
plies, as well as the venting, must be installed in
accordance with applicable specifications and codes.
Only firms (or individuals) well qualified in this type of
work should install the system. Consult local Building
Inspectors, Fire Marshals or your local ROBERTS
GORDON
plies, as well as the venting, must be installed in
accordance with applicable specifications and codes.
Only firms (or individuals) well qualified in this type of
work should install the system. Consult local Building
Inspectors, Fire Marshals or your local ROBERTS
GORDON
®
independent distributor for guidance.
Use the information given in this manual together
with the cited codes and regulations to perform the
installation. If any aspects of the installation are
unclear, consult your ROBERTS GORDON
with the cited codes and regulations to perform the
installation. If any aspects of the installation are
unclear, consult your ROBERTS GORDON
®
indepen-
dent distributor for clarification. The installer must fur-
nish all needed materials that are not furnished as
standard equipment. It is also the installer's responsi-
bility to see that the materials and installation meth-
ods used result in a job that is workmanlike in
appearance and is in compliance with the require-
nish all needed materials that are not furnished as
standard equipment. It is also the installer's responsi-
bility to see that the materials and installation meth-
ods used result in a job that is workmanlike in
appearance and is in compliance with the require-
ments of this manual. The installer must give this
manual and the Use and Care Manual to the owner.
manual and the Use and Care Manual to the owner.
Get user manuals:
See SafeManuals.com