Panasonic TC-60AS640U 用户手册
13
English
Audio connection
Optical cable
DIGITAL AUDIO IN
e.g. Amplifier with speaker system
HDMI cable
HDMI OUT (ARC)
HDMI connection is available if connected audio
equipment has ARC (Audio Return Channel) function.
equipment has ARC (Audio Return Channel) function.
•
Please refer to eHELP (p. 21) for more details.
■
Connecting Home Theater Audio System
TV
OPTICAL
DIGITAL
AUDIO IN
Optical cable
DIGITAL AUDIO IN
Home Theater Audio System (Rear)
●
It is recommended to use optical cable (supplied) for
this connection.
this connection.
Other than optical cable connections are not
necessary to connect TV and Home Theater Audio
System.
necessary to connect TV and Home Theater Audio
System.
●
Check if “Digital audio settings” is “PCM”, when
connecting TV to Home Theater Audio System with
optical cable.
connecting TV to Home Theater Audio System with
optical cable.
•
Please refer to eHELP (p. 21) for “Digital audio
settings” .
settings” .
■
About built-in wireless LAN/Bluetooth
●
To use the built-in wireless LAN, using an access
point is recommended.
point is recommended.
●
To use the built-in wireless LAN in the access point
mode, up to 7 devices are connectable. But the
transfer rate will vary according to communication
environment or connected equipments.
mode, up to 7 devices are connectable. But the
transfer rate will vary according to communication
environment or connected equipments.
●
Do not use the built-in wireless LAN to connect to any
wireless network (SSID*
wireless network (SSID*
1
) for which you do not have
usage rights. Such networks may be listed as a result
of searches. However, using them may be regarded
as illegal access.
of searches. However, using them may be regarded
as illegal access.
●
Check that the Access point supports WPS*
2
.
(If it does not support WPS, the encryption key of the
Access point is required when configuring settings.)
Access point is required when configuring settings.)
●
Follow the instructions on the Access point setup
screen and configure the appropriate security
settings.
screen and configure the appropriate security
settings.
For more details on setting of Access point, please
refer to operating manual for the Access point.
refer to operating manual for the Access point.
●
We recommend using 11n (5 GHz) for the wireless
system between the built-in wireless LAN and Access
point.
system between the built-in wireless LAN and Access
point.
Communication is also possible with 11a, 11b, and
11g, but the communication speed may be slower.
11g, but the communication speed may be slower.
●
If the wireless system of the Access point is changed,
devices that could connect by wireless LAN may no
longer be able to connect.
devices that could connect by wireless LAN may no
longer be able to connect.
●
Data transmitted and received over radio waves may
be intercepted and monitored.
be intercepted and monitored.
●
Keep the TV away from the following devices as
much as possible:
much as possible:
Wireless LAN, microwaves, and other devices that
use 2.4 GHz and 5 GHz signals. Otherwise, the TV
failures such as malfunction may occur due to the
radio wave interference.
use 2.4 GHz and 5 GHz signals. Otherwise, the TV
failures such as malfunction may occur due to the
radio wave interference.
●
When noises occur due to the static electricity, etc.,
the TV might stop operating for the protection of the
devices. In this case, turn the TV Off with power On /
Off switch, then turn it On again.
the TV might stop operating for the protection of the
devices. In this case, turn the TV Off with power On /
Off switch, then turn it On again.
*
1 SSID is a name for identifying a particular wireless
network for transmission.
*
2 WPS: Wi-Fi Protected Setup