Pelco C1528M-F 用户手册
76
C1528M-F (6/05)
MACRO COMMANDS
Table H provides a description of each macro command and the additional fields required for each command. Refer to the Macro section for
instructions on programming macros.
instructions on programming macros.
Table H. Macro Commands
Command
Description
Specify
Field(s)
GON
Activate an auxiliary.
Auxiliary
Command #
GOFF
Turn off an auxiliary.
Auxiliary
Command #
Auxiliary Notes:
•
•
“Global” includes both internal and external auxiliaries.
•
Auxiliaries on the rear panel of the CM6800E Matrix Switcher are activated by global auxiliary numbers 1, 2 and 3.
CON
Activate a camera auxiliary.
Camera auxiliary
Command #
Camera
Camera
Monitor
Monitor
COFF
Turn off a camera auxiliary.
Camera auxiliary
Command #
Camera
Camera
Monitor
Monitor
SEQ
Start a sequence. A sequence runs continuously until a system operator selects a
different camera, or an event timer starts another sequence or macro.
different camera, or an event timer starts another sequence or macro.
Sequence
Command #
Monitor
Monitor
SWT
Switch a camera to a monitor.
Camera
Command #
Monitor
Monitor
COPY
Copy a camera view to a monitor.
Monitor to copy from
Command #
Monitor to copy to
Monitor
Go To
Go to step number specified.
Step
Command #
Loop
Loop a macro.
0 = loop continuously
1-999 = loop the specified
number of times
1-999 = loop the specified
number of times
Command #
?AUX
Check a local auxiliary; if the auxiliary is active, the next step is executed; if the
auxiliary is not active, the next step is skipped.
auxiliary is not active, the next step is skipped.
Local auxiliary
Command #
?ALM
Check an internal alarm; if the alarm is active, the next step is executed; if not, the
next step is skipped.
next step is skipped.
Alarm
Command #
?SW
Check whether a camera is displayed on a monitor; if it is, the next step is
executed; if not, the next step is skipped.
executed; if not, the next step is skipped.
Camera
Camera
Monitor
Monitor
STPM
Stop a macro.
Macro
Command #
End
Exit the macro; no further steps are executed. Any macro or sequence started by
this macro will continue to run.
this macro will continue to run.
None
None
DON
Displays on-screen text on the specified monitor.
Monitor
Monitor
DOFF
Removes on-screen text from the specified monitor.
Monitor
Monitor
MSWT
Switch a camera connected through the multiplexer.
Camera to switch
◆
Command #
Multiplexer input
Camera
Monitor
Monitor
PIPB
Display multiplexer picture-in-picture view with the designated camera in the
background.
background.
Background camera
◆
Command #
Multiplexer input
Camera
Monitor
Monitor
PIPF
Display multiplexer picture-in-picture view with the designated camera in the
foreground.
foreground.
Foreground camera
◆
Command #
Multiplexer input
Camera
Monitor
Monitor
◆
For multiplexer functions, the camera number is the number of the video input on the multiplexer. The multiplexer input number is the number of the
video input on the rear panel of the CM6800E.
(Continued on next page)