Toshiba 3511 用户手册

12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH 

Never attempt to repair, disassemble or modify the equipment by yourself. You could cause a fire or get an 
electric shock.
Always contact your service representative for maintenance or repair of the internal parts of the copier.

When the CALL SERVICE 

 symbol blinks and “Misfeed in copier Press HELP” appears, output is no 

longer possible. Contact your service technician.

When the CALL SERVICE 

 or CLEAR PAPER 

 symbol is blinking, if you press the [CLEAR] button 

and the digital key [8] together before you turn off the power, the corresponding error code will appear at 
the output quantity display area only while both are held down. Please provide the error code when you ask 
for service.

Since heaters are used to fix toner images to the paper, a heat-sensing safety circuit is incorporated in this 
equipment. After you turn ON the power switch, if a certain temperature is not attained within a specified 
period of time, the safety circuit assumes that something abnormal has happened and it stops the 
equipment’s operation.
This can happen when the temperature is low even if the equipment is not malfunctioning. If this occurs, 
turn the power OFF and then ON again. ("Turning off the Power (Shutting down)"   Page 32) Repeat this 
procedure twice, and if the problem still persists, turn OFF the power and contact your service technician.

When “Time for periodic maintenance” appears on the touch panel, the assistance from a qualified service 
technician is required. Contact your service technician.