Asrock B75M-GL R2.0 90-MXGN10-A0UAYZ 用户手册

15

Chapter 2: Installation

This is a Micro ATX form factor (9.6" x 8.4", 24.4 x 21.3 cm) motherboard. Before 
you install the motherboard, study the configuration of your chassis to ensure that 
the motherboard fits into it.

 

Make sure to unplug the power cord before installing or removing the  

 

motherboard. Failure to do so may cause physical injuries to you and  

 

damages to motherboard components.

2.1  Screw Holes

Place screws into the holes indicated by circles to secure the motherboard to the 
chassis.

 

Do not over-tighten the screws!  Doing so may damage the motherboard.

2.2  Pre-installation Precautions

Take note of the following precautions before you install motherboard components 
or change any motherboard settings.

1.   Unplug  the  power  cord  from  the  wall  socket  before  touching  any 

components.

2.   To  avoid  damaging  the  motherboard’s  components  due  to  static 

electricity,  NEVER  place  your  motherboard  directly  on  the  carpet 
or the like. Also remember to use a grounded wrist strap or touch a 
safety grounded object before you handle the components.

3.   Hold components by the edges and do not touch the ICs.
4.   Whenever you uninstall any component, place it on a grounded anti-

static pad or in the bag that comes with the component.

5. 

When  placing  screws  into  the  screw  holes  to  secure  the  mother-
board to the chassis, please do not over-tighten the screws! Doing 
so may damage the motherboard.

 

      Before you install or remove any component, ensure that the power is 

 

 

      switched off or the power cord is detached from the power supply. Failure to do 

 

 

      so may cause severe damage to the motherboard, peripherals and/or 

 

 

      components.