Kingston Technology 512MB, DDR RAM, HYPERX VALUERAM, PC433, CL2.0, NON-ECC KHX3500K2/512 数据表
产品代码
KHX3500K2/512
Memory Module Specification
Document No. 4803585-001.A00
06/13/03
KHX3500K2/512
512MB (256MB 32M x 64-Bit x 2 pcs.)
PC3500 CL2 184-Pin DIMM Kit
KEYED
Page 1
DESCRIPTION:
Kingston's KHX3500K2/512 is a kit of two 32M x 64-bit (256MB) DDR434 CL2 SDRAM
(Synchronous DRAM) memory modules. Total kit capacity is 512MB. The components on each
module include eight 32M x 8-bit (8M x 8-bit x 4 Bank / 217MHz, 4.6ns) DDR434 SDRAM in TSOP
packages. Each 184-pin DIMM uses gold contact fingers and requires +2.6V. The electrical and
mechanical specifications are as follows:
(Synchronous DRAM) memory modules. Total kit capacity is 512MB. The components on each
module include eight 32M x 8-bit (8M x 8-bit x 4 Bank / 217MHz, 4.6ns) DDR434 SDRAM in TSOP
packages. Each 184-pin DIMM uses gold contact fingers and requires +2.6V. The electrical and
mechanical specifications are as follows:
FEATURES:
Power supply : Vdd: 2.6V ± 0.2V, Vddq: 2.6V ± 0.2V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 2 (clock)
Programmable Burst length (2, 4, 8)
Programmable Burst type (sequential & interleave)
Timing Reference: 2-3-3-7-1 at +2.6V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.200” (30.48mm), single sided component
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 2 (clock)
Programmable Burst length (2, 4, 8)
Programmable Burst type (sequential & interleave)
Timing Reference: 2-3-3-7-1 at +2.6V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.200” (30.48mm), single sided component
PERFORMANCE:
Clock Cycle Time (tCK)
4.6ns (min.) / 10ns (max.)
Row Cycle Time (tRC)
55ns (min.)
Refresh Row Cycle Time (tRFC) 70ns (min.)
Row Active Time (tRAS)
Row Active Time (tRAS)
40ns (min.) / 100,000ns (max.)
Power (IDD0)
2.200 W (operating)
UL Rating
94 V - 0
Operating Temperature
0
o
C to 70
o
C
Storage Temperature
-55
o
C to +150
o
C