Draper 121090 产品数据表
Technical Data Sheet
IRT/R—Infrared Transmitter/Receiver By Draper
USES:
Up, Down and Stop control of an LVC-III or MC1 via IR (infrared).
COMPATIBILITY:
The IRT/R can be used with either the LVC-III or the MC1. Other controls may be
connected to the LVC-III or MC1 simultaneously:
a. LVC-S low voltage wall switch (or Auxiliary control systems employing “dry”
contacts).
b. WRT/R radio frequency remote control package (splitter required).
c. LVC-SL LED low voltage wall switch (splitter required).
With the LVC-III, for simultaneous use of an IR and RF or IR & LVC-SL a splitter is
required. With the MC1, the above is also true, but additionally a power supply is
required when using a WRT/R or LVC-SL.
The IRT/R operates on a proprietary IR protocol.
The transmitter part of this package, the IRT, is available as a replacement part.
CONTACTS:
None. This package merely consists of the transmitter and receiver. The contacts are
part of the LVC-III or MC1.
RATING:
Not available. The IRT/R operates on IR protocol.
DESCRIPTION:
The IRT/R is a package consisting of a receiver and hand-held transmitter which
control an LVC-III or MC1 via infrared. Its range with fresh batteries is approx. 50 feet.
The 1-channel transmitter is approx. 2" wide, 6
3
/
8
" long, and 1" thick. Operates on two
AAA batteries (included). The receiver is approx. 1¼" x 2" x ¾", with an 10' long data
cable, which plugs into a standard RJ-11 plug on the LVC-III or MC1. It must be located
within sight of the transmitter user.
PART NUMBERS:
121065—IRT/R, Transmitter and Receiver
121066—IRT,
Transmitter
only
ILLUSTRATION:
®
Copyright ©2009 Draper Inc.
Form IRT/R_TechDataSheet09
Printer in U.S.A.
6
3
/
8
"
2"
2"
1
1
/
4
"