Zebra 77660 用户手册
134
Z4Mplus and Z6Mplus Maintenance Manual
13358L Rev. 1 11/17/03
Section 4
Preventive and Corrective Maintenance
10.
Using the screw supplied, secure the top of the socket board to the long metal
standoff.
standoff.
Figure 4-70. Standoff Mounting Location
11.
•
If no PSII is installed, continue to next step 12.
•
If a PSII is installed, align the parallel connector of the PSII with the parallel
port plug on the MLB and the standoff(s). Press the PSII in until the standoff(s)
lock the board in place.
port plug on the MLB and the standoff(s). Press the PSII in until the standoff(s)
lock the board in place.
12.
Refer to Figure 4-71. Install the back cover supplied in the kit.
J3
J1
Power
Supply
PCMCIA
Socket Board
Non-Component
Side
Main Logic
Board
Mounting
Screw
Standoff
Plastic
Standoffs
Note •
If a PSII is installed, the back will not have to be installed.