Zebra 77660 用户手册
13358L Rev. 1 11/17/03
Z4Mplus and Z6Mplus Maintenance Manual
43
Operations Overview
Section 2
Feed Key Self Test
Press and hold FEED while turning On (
l
) the printer. Release the key anytime after the
first front panel LED turns off.
The quantity of labels printed during this print quality test depends on the dot density of
the printhead.
the printhead.
300 dpi printers: 7 labels are printed at the 2 ips and 6 ips print speeds.
200 dpi printers: 7 labels are printed at the 2 ips, 6 ips and 10 ips print speeds.
Each label is printed at a different darkness setting, starting at three settings below the
current configured value and continuing to increase until it is three settings darker than the
configured value. The relative darkness and speed are printed on each label. The bar codes
on these labels can be ANSI-graded to check print quality.
current configured value and continuing to increase until it is three settings darker than the
configured value. The relative darkness and speed are printed on each label. The bar codes
on these labels can be ANSI-graded to check print quality.
Figure 2-16 provides an example of the Feed Key Self Test label.
Figure 2-16. Feed Key Self Test Label