Zebra 77660 用户手册
58
Z4Mplus and Z6Mplus Maintenance Manual
13358L Rev. 1 11/17/03
Section 4
Preventive and Corrective Maintenance
Personal Safety Tips
Do not wear any jewelry (rings, watches, etc.) or loose clothing when servicing the
printers.
printers.
Beware of “Pinch Points” on the printers. Be especially careful of:
•
Opening and closing of covers
•
Printhead
•
Rewind Spindle
•
Platen Roller
Wear protective eye wear when removing E-rings, C-clips, snaprings, and springs.
These are under tension and could fly off while removing.
These are under tension and could fly off while removing.
For personnel and equipment safety, always use an approved three-conductor power
cord specific to the region our country intended for installation. This cord must use an
IEC-320 female connector, and the appropriate region-specific three-conductor
grounded plug configuration.
cord specific to the region our country intended for installation. This cord must use an
IEC-320 female connector, and the appropriate region-specific three-conductor
grounded plug configuration.