Zebra 77660 用户手册
80
Z4Mplus and Z6Mplus Maintenance Manual
13358L Rev. 1 11/17/03
Section 4
Preventive and Corrective Maintenance
9.
Refer to Figure 4-19. Using two standard screwdrivers or needle nose pliers,
squeeze and push up on the barbed legs of outer spring clip to disengage it from the
platen housing.
squeeze and push up on the barbed legs of outer spring clip to disengage it from the
platen housing.
10.
Locate the circular cut-out on the top of the outer spring clip, insert a screwdriver,
gently pry up and remove the clip.
gently pry up and remove the clip.
Figure 4-19. Platen Roller Disassembly
11.
Remove and discard the platen roller and bearings.
Note •
If needed, loosen the inboard clip using the same procedure.
Tab
Barbed
Legs