Da-Lite 38700 产品宣传页
F R O N T P R O J E C T I O N S C R E E N S
14
www.da-lite.com • info@da-lite.com
PROFESSIONAL ELECTROL
®
• Da-Lite’s largest enclosed electric screen.
• Heavy-duty screen for exposed or recessed installation.
• Heavy-duty screen for exposed or recessed installation.
Wall or Ceiling Mounted or Ceiling
Recessed Electric Projection
Screen
When ordering, make appropriate
selections:
1.
Select size from charts at the
lower right.
2.
Select viewing surface:
• Matte White
GREENGUARD
®
and
GREENGUARD
®
Children and
Schools Certified.
3.
Options:
• Extra Drop available to lower
picture area more than normal.
Specify total drop at top _____
(black or white) or at bottom
_____ (black or white). 22'
maximum total surface height
including picture area, except for
24' wide, where maximum drop
is 18'.
• Single Motor Low Voltage Control
(LVC) - external.
• Wireless Remote Control for LVC.
• Radio Frequency Remote.
• Radio Frequency Range
Extender available
• Infrared Remote.
• Key Locking Cover Plate for 120V
or LVC Switch.
• Key Operated Switch for 120V
only (NOTE: Cannot be used with
LVC).
• No Borders (Black masking
borders standard).
• 220 Volt (50 Hz) Motor.
• Video Projector Interface Control
- external.
• External SCB-100 - RS-232 Serial
Control Board
• NET-100 Ethernet-Serial
Adapter
• White box (black standard).
SUGGESTED SPECIFICATIONS:
_______________projection screen(s),____________(H) x _________(W),
electrically operated 120 volt A.C. (60 Hz). Screen will have not more
than 2.4 amp. motor. Shall have specially designed motor mounted
inside the roller, to be three wire with ground, quick reversal type, oiled
for life, with automatic thermal overload cutout, integral gears, capacitor
and an electric brake to prevent coasting. To have preset but adjustable
limit switches to automatically stop screen fabric in the “up” and “down”
positions. Rigid metal roller, to be at least 3" in diameter (on screens 12'
wide), 5
electrically operated 120 volt A.C. (60 Hz). Screen will have not more
than 2.4 amp. motor. Shall have specially designed motor mounted
inside the roller, to be three wire with ground, quick reversal type, oiled
for life, with automatic thermal overload cutout, integral gears, capacitor
and an electric brake to prevent coasting. To have preset but adjustable
limit switches to automatically stop screen fabric in the “up” and “down”
positions. Rigid metal roller, to be at least 3" in diameter (on screens 12'
wide), 5
3/4" in diameter (on screens 14' to 18' wide) or 7" in diameter (on
screens where either height or width equal or exceed 20'). Roller to be
mounted in one heavy duty bracket equipped with self-aligning bearing.
Motor to be secured to the case with a steel motor mount bracket. Screen
surface to be flame retardant and mildew resistant fiberglass with black
masking borders standard. Case to be of wood, with double top for extra
rigidity and strength. Case to be finished with a black primer coat, ready
to accept final finish by others, heavy metal brackets shall be supplied for
mounting screen to ceiling or wall. To be complete with 3 position control
switch with cover plate. Screen to be listed by Underwriter's Laboratories.
mounted in one heavy duty bracket equipped with self-aligning bearing.
Motor to be secured to the case with a steel motor mount bracket. Screen
surface to be flame retardant and mildew resistant fiberglass with black
masking borders standard. Case to be of wood, with double top for extra
rigidity and strength. Case to be finished with a black primer coat, ready
to accept final finish by others, heavy metal brackets shall be supplied for
mounting screen to ceiling or wall. To be complete with 3 position control
switch with cover plate. Screen to be listed by Underwriter's Laboratories.
Matte White: Horizontal seam required when both dimensions exceed 16'.
DO NOT SEAL IN–ALLOW ACCESS
Recessed installation requires access to motor and screen roller.
FOR EXPOSED INSTALLATION
If the screen is to be mounted in an exposed position, it may be covered with finished
plywood, veneer paneling, plastic wall covering or a valance.
plywood, veneer paneling, plastic wall covering or a valance.
Detailed dimensional drawings, wiring diagrams and installation instructions
available upon request. Specifications subject to change without notice.
available upon request. Specifications subject to change without notice.
Viewing
Nominal
Overall
Approx.
Area
Diagonal
Case
Shipping
H x W
Length
Wt. Lbs.
120" x 160"
200"
174"
250
123" x 164"
210"
178"
260
141" x 188"
240"
202"
380
4:3 VIDEO FORMAT DIMENSIONS (2" standard black drop at top)
Sizes
Overall
Approx.
H x W
Case
Shipping
Length
Wt. Lbs.
9' x 12'^
154"
245
12' x 12'
154"
251
10'6" x 14'^
178"
266
14' x 14'
178"
266
12' x 16'^
202"
382
16' x 16'
202"
382
13'6" x 18'^
226"
429
18' x 18'
226"
429
15' x 20'^
250"
835
20' x 20'
250"
845
11' x 22'
274"
901
16'6" x 22'^
274"
911
22' x 22'
274"
921
12' x 24'
298"
987
18' x 24'^
298"
997
SQUARE FORMAT DIMENSIONS
(screens with ^ have 2" standard black drop at top)
(screens with ^ have 2" standard black drop at top)
Overall case length dimensions ±
1/4
".
Note: Custom formats and sizes available upon request.
Picture Surface
Wall Type Hanger
Ceiling Type Hanger
Ceiling Mount
Without Hangers
Recessed Above Ceiling
Picture Surface
2" Molding
Picture Surface
1" x 3" Cleat
Picture Surface
Rafters
SCREENS UP TO 18' WIDE
SCREENS 20' AND WIDER
Length = Fabric Width
+10", All Sizes
Electrical
Outlet Box
5"
5"
9-1/2"
11-5/16"
Reinforced
Top
Motor End
Motor In The Roller
Screen Without Doors
Length = Fabric Width
+10", All Sizes
Electrical
Outlet Box
5"
5"
10-3/4"
12-9/16"
Reinforced
Top
Motor End
Motor In The Roller
Screen Without Doors
Viewing
Nominal
Overall
Approx.
Area
Diagonal
Case
Shipping
H x W
Length
Wt. Lbs.
78" x 139"
159"
154"
259
92" x 164"
188"
178"
266
106" x 188"
216"
202"
382
119" x 212"
243"
226"
429
133" x 236"
271"
250"
835
16:9 HDTV FORMAT DIMENSIONS (2" standard black drop at top)