HP MSM410 J9427C 数据表

2

• IEEE 802.1p prioritization

delivers data to devices based on the priority and type of traffic

• SpectraLink Voice Priority (SVP) support

prioritizes SpectraLink voice IP packets sent from a SpectraLink
NetLink SVP server to SpectraLink wireless voice handsets to help
ensure excellent voice quality

• Wireless

– L2/L3/L4 classification: IEEE 802.1p VLAN priority, SpectraLink

SVP, and DiffServ

– Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and Service-Aware

priority assigned by VSC

– Maximum VoIP call capacity: 12 active calls on IEEE 802.11

a/b/g/n

• Network management

– Fully manageable using HP Manager and HP Mobility Manager

– SNMP v2c, SNMP v3, MIB-II with Traps, and RADIUS Authentication

Client MIB (RFC 2618)

– Embedded HTML management tool with secure access (SSL and

VPN)

– Scheduled configuration and firmware upgrades from a central

server

• Diagnostic

– Client event log records association, authentication, and DHCP

events

– Packet capture tool for Ethernet and IEEE 802.11 interfaces (PCAP

format)

– Data rate matrix

• Protection against rogue IEEE 802.11a/b/g/n access points and

wireless clients
HP MSM415 RF Security Sensors continuously scan for detection,
classification, and prevention of wireless threats on IEEE
802.11a/b/g and 802.11n wireless networks

• Provides 24 x 7 detection, classification, and prevention

capabilities
HP MSM415 RF Security Sensors are able to continuously provide
detection, classification, and prevention capabilities, even when the
connectivity to the HP RF Manager IDS/IPS Controller is lost; the
MSM415 security sensor supports all HP and third-party WLAN
deployments

• Signature-based detection

detects attacks that have known attack patterns; IPS maintains a
signature database that contains the pattern definitions for known
attacks that can be automatically updated using a subscription
service

• Protocol anomaly-based detection

detects attacks that use anomalies in application protocol payloads

• Auto-MDIX

automatically adjusts for straight-through or crossover cables on
all 10/100 ports

• IEEE 802.3af Power over Ethernet (PoE) support

simplifies deployment and dramatically reduces installation costs
by helping to eliminate the time and cost involved in supplying local
power at each access point location

• Anywhere, anytime wireless coverage

– Single radio IEEE 802.11a/b/g/n access point

– Per-radio software-selectable configuration of frequency bands

– Self-healing, self-optimizing local mesh extends network

availability

– Wi-Fi Alliance Certified for interoperability with all IEEE

802.11a/b/g/n client devices

– IEEE 802.3af PoE powered

• Medical standards

meets the European EN60601-1-2 standard for healthcare

• Interoperability

Wi-Fi Alliance certifications, including IEEE 802.11g Wi-Fi and WPA2,
to help ensure multivendor interoperability

• Virtual Service Communities (VSCs)

– Up to 16 SSIDs, each with unique MAC address, and configurable

SSID broadcasts

– Individual security and QoS profiles per VSC

– Configurable DTIM and minimum data rate per VSC

– Each VSC can be mapped to separate IEEE 802.1Q VLANs

– WMM and/or WMM-PS

– Security filter

– IP filter

• AP client access control functions

– IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS,

EAP-TTLS, and PEAP

– MAC address authentication using local or RADIUS access lists

– RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2

– RADIUS Client (RFC 2865 and 2866) with location-aware support

– Layer 2 wireless client isolation

• Auto Channel Select (ACS)

helps reduce radio co-channel interference by automatically
selecting an unoccupied radio channel