ZyXEL 202H 91-003-194003B 用户手册

产品代码
91-003-194003B
下载
页码 375
P-202H Plus v2 User’s Guide
33
Chapter 1 Getting To Know Your  ZyXEL Device
4-Port Switch
A combination of switch and router makes your ZyXEL Device a cost-effective and viable 
network solution. You can connect up to four computers to the ZyXEL Device without the 
cost of a hub. Use a hub to add more than four computers to your LAN.
Auto-negotiating 10/100 Mbps Ethernet LAN
The LAN interface automatically detects if they are on a 10 or a 100 Mbps Ethernet.
Auto-crossover 10/100 Mbps Ethernet LAN
The LAN interface automatically adjusts to either a crossover or straight-through Ethernet 
cable.
Call Scheduling
Configure call time periods to restrict and allow access for users on remote nodes.
Network Address Translation (NAT)
NAT (Network Address Translation - NAT, RFC 1631) allows the translation of multiple IP 
addresses used within one network to different IP addresses known within another network.
SNMP (Simple Network Management Protocol - Versions 1 and 2)
SNMP, a member of the TCP/IP protocol suite, allows you to exchange management 
information between network devices. Your ZyXEL Device supports SNMP agent 
functionality that allows a manager station to manage and monitor the ZyXEL Device through 
the network.
IP Alias
IP Alias allows you to partition a physical network into logical networks over the same 
Ethernet interface. The ZyXEL Device supports three logical LAN interfaces via its single 
physical Ethernet interface with the ZyXEL Device itself as the gateway for each LAN 
network.
ISDN Data Link Connections
The ZyXEL Device supports two types of ISDN Data Link Connections: point-to-point and 
point-to-multipoint. 
ISDN Basic Rate Interface (BRI) Support
The ZyXEL Device supports a single BRI. A BRI offers two 64 Kbps channels, which can be 
used independently for two destinations or be bundled to speed up data transfer.