ZyXEL 4-port Prestige 792H Router 91-004-342001 用户手册

Prestige 792H G.SHDSL Router 

LAN Setup 

4-5 

The following table describes the labels in this screen. 

DHCP 

 

DHCP

 

If set to Server, your Prestige can assign IP addresses, an IP default gateway 
and DNS servers to Windows 95, Windows NT and other systems that support 
the DHCP client. 

If set to None, the DHCP server will be disabled.  

If set to Relay, the Prestige acts as a surrogate DHCP server and relays DHCP 
requests and responses between the remote server and the clients. Enter the IP 
address of the actual, remote DHCP server in the Remote DHCP Server field in 
this case.  

When DHCP is used, the following items need to be set:  

Client IP Pool Starting 
Address

 

This field specifies the first of the contiguous addresses in the IP address pool.

 

Size of Client IP Pool

 

This field specifies the size or count of the IP address pool.

 

Primary DNS Server

 

Enter the IP addresses of the DNS servers. The DNS servers are passed to the 
DHCP clients along with the IP address and the subnet mask.

 

Secondary DNS Server

 

As above.

 

Remote DHCP Server

 

If Relay is selected in the DHCP field above then enter the IP address of the 
actual remote DHCP server here.

 

TCP/IP 

 

IP Address

 

Enter the IP address of your Prestige in dotted decimal notation, for example, 
192.168.1.1 (factory default). 

 

IP Subnet Mask 

 

Type the subnet mask assigned to you by your ISP (if given).

 

RIP Direction

 

Select the RIP direction from None, Both, In Only and Out Only.

 

RIP Version

 

Select the RIP version from RIP-1, RIP-2B and RIP-2M.

 

Multicast

 

IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to 
establish membership in a multicast group. The Prestige supports both IGMP 
version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.