Transition Networks S4TEF1035-125-NA 产品宣传页
Stand-Alone
S4TEF10xx-125
S4TEF10xx-125
Specifications
Standards
Ethernet
interface:
IEEE
802.3™-2008
TDM
interfaces:
ANSI T1.102, T1.403 and T1.408
ITU I.431, G.703,G.736, G.775 and G.823
ETSI 300-166, 300-233 and TBR 12/13
AT&T
Pub
62411
Switches
Numerous switch settings for line coding, line buildout,
loopback (per port), AIS setting
Ethernet port settings
Auto-Negotiation, Force speed/duplex and enable
Transparent Link Pass Through
Dimensions
Width: 3.7” [94 mm]
Depth: 4.7” [119 mm]
Height: 1.8” [46 mm]
Power
External AC/DC provided; 12 VDC, 1.25A; unregulated;
standard; UL listed
Power Consumption
4.4 Watts
Operating Temperature
-40°C – 70°C (not including power supply)
Storage Temperature
-40°C – 85°C
Altitude
0 – 10,000 ft.
Operating Humidity
5% – 95% (non-condensing)
Shipping Weight
2 lbs. [0.90 kg]
Regulatory Compliance
EN55022 Class A, EN55024, CE mark
Warranty
Lifetime
These products offer a low cost transport capability for four T1/E1/J1 and one Ethernet
port. The offering will provide copper connections compatible with G.703, AMI/B8ZS/
HDB3 and 10/100BASE-TX; while the optical connection will run at 155 Mbps. TDM
traffic is not mapped to Ethernet. A hardware-based solution guarantees the constant
bit rate of TDM transport without requiring traffic management. The product provides
physical layer status monitoring, alarm classification and data classification functions
for Telecom providers to manage their fiber optic network and reduce operation and
maintenance costs. Target applications of the device include: FTTx, such as Fiber-to-
the-Business, Fiber-to-the-Building, Fiber to-the-MDU and Fiber-to-the-Home.
port. The offering will provide copper connections compatible with G.703, AMI/B8ZS/
HDB3 and 10/100BASE-TX; while the optical connection will run at 155 Mbps. TDM
traffic is not mapped to Ethernet. A hardware-based solution guarantees the constant
bit rate of TDM transport without requiring traffic management. The product provides
physical layer status monitoring, alarm classification and data classification functions
for Telecom providers to manage their fiber optic network and reduce operation and
maintenance costs. Target applications of the device include: FTTx, such as Fiber-to-
the-Business, Fiber-to-the-Building, Fiber to-the-MDU and Fiber-to-the-Home.
stand-alone network interface device
Features
4
Loopback via Test Set
4
Auto-Negotiation for 10/100BASE-TX
4
AutoCross™ (auto MDI/MDI-X)
[
4
Transparent Link Pass Through for
Ethernet
4
Automatic Link Restoration
4
Pause (Flow Control)
4
Remote Management
4
Local and Remote Loopback
4
Remote Fiber Loss Signaling
4
AIS/TAOS
4
LEDs for each data port
4
Settings for line code, line length,
local loopback or remote loopback
4
T1/E1/J1 mode settings
4
Local (AUX) Management Interface
4
Access to complete status information
on local and remote device
4
Field Upgradeable Firmware
4
Ex-
tended Operating Temperature
Optional Accessories (sold separately)
Wide Input (24 - 60 VDC) Power Supplies
SPS-2460-SA
Stand-Alone Power Supply
Mounting Options
WMBD
DIN Rail Bracket 5.0” [127 mm]
WMBD-F
DIN Rail Bracket (flat) 3.3” [84 mm]
WMBL
Wall Mount Bracket 4.0” [102 mm]
WMBV
Vertical Wall Mount Bracket 5.0” [127 mm]
see also:
4x T1 Transport Mux Point System™ Slide-In-Module NID
4x T1/E1/J1 + 10/100 Ethernet Transport Mux
4x T1/E1/J1 + 10/100 Ethernet to Fiber
Devices must be used in pairs. Typically installation will include a chassis card [C4TEF, ] installed
in the Point System™ locally and a stand-alone device installed at the remote location.
in the Point System™ locally and a stand-alone device installed at the remote location.
4
Low cost transport capability:
(4) T1/E1/J1; (1) Ethernet
4
Target applications include: FTTx,
such as Fiber-to-the-Business,
Fiber-to-the-Building, Fiber-to-the-
MDU and Fiber-to-the-Home.
Fiber-to-the-Building, Fiber-to-the-
MDU and Fiber-to-the-Home.
Application
Ordering Information
S4TEF1011-125
1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus10/100BASE-TX (RJ-45)
[100 m]
S4TEF1013-125
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus10/100BASE-TX (RJ-45)
[100 m]
S4TEF1014-125
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100 m]
S4TEF1015-125
1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100 m]
*S4TEF1016-125
1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100 m]
*S4TEF1017-125
1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100 m]
*S4TEF1035-125
1550nm single mode (SC)
[120 km/74.6 mi.] Link Budget: 36.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100 m]
**S4TEF1040-125
1 SFP port (Empty)
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
**S4TEF1040-145
2 SFP ports (Empty)
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
Single Fiber Products
*S4TEF1029-125
1310nm TX/1550nm RX single fiber SM
(SC)
[20 km/12.4 mi.] LB: 19.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100 m]
*S4TEF1029-126
1550nm TX/1310nm RX single fiber SM
(SC)
[20 km/12.4 mi.] LB: 19.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100 m]
*S4TEF1029-127
1310nm TX/1550nm RX single fiber SM
(SC)
[40 km/24.9 mi.] LB: 25.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100 m]
*S4TEF1029-128
1550nm TX/1310nm RX single fiber SM
(SC)
[40 km/24.9 mi.] LB: 25.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100 m]
4x T1/E1/J1 + 10/100 Ethernet to Fiber