ZyXEL Prestige 202H Plus ISDN Router 91-003-154001B 用户手册
产品代码
91-003-154001B
P-202H Plus v2 User’s Guide
141
Chapter 12 NetCAPI
12.3 Configuring NetCAPI
To edit your ZyXEL Device's NetCAPI settings, click Advanced > NetCAPI. The screen
appears as shown.
appears as shown.
Figure 61 NetCAPI
The following table describes the fields in this screen.
Table 44 NetCAPI
LABEL
DESCRIPTION
Active
Select this check box to enable NetCAPI.
Max Number of
Registered
Users
When you want to use NetCAPI to place outgoing calls or to listen to incoming calls,
you must start RVSCOM on your computer, and RVSCOM registers itself to the
ZyXEL Device. Enter the maximum number of clients (no more than 5) for which you
want the ZyXEL Device to allow connections at the same time.
Incoming Data
Call Number
Matching
This field determines how incoming calls are routed. Select NetCAPI if you want to
direct all incoming data calls to NetCAPI. Select Subscriber Number (MSN) if you
want to direct all incoming call to the ZyXEL Device only when the incoming phone
number matches the ISDN DATA number. If the incoming phone number does not
match the ISDN DATA number, then the call will be routed to NetCAPI. Select
Called Party Subaddress if you want to direct all incoming calls to the ZyXEL
Device only when the incoming call matches the subaddress of ISDN DATA. If the
incoming call does not match the subaddress of ISDN DATA, then the call will be
routed to NetCAPI.
Start IP
Enter the first IP address of a group of NetCAPI clients. Each group contains
contiguous IP addresses.