Draper 300250 产品宣传页
Serial and Network Control
for Motorized Projection
Screens and Projector Lifts
for Motorized Projection
Screens and Projector Lifts
by
Copyright © 2007 Draper Inc. Form Serial-NetworkControl_PlanSheet07-R Printed in U.S.A.
PROJECT:
SCREEN MODEL:
ARCHITECT:
CONTRACTOR:
SUPPLIER:
DATE:
REVISED:
Please Note: Draper motorized screens, AeroLifts, the Micro Projector Lift and the LCD Lift come with one 110V-120V AC 3-position wall
switch (for ScissorLift, Revelation, Phantom and Orbiter, see their respective submittals). For Serial or IP control, select from below:
switch (for ScissorLift, Revelation, Phantom and Orbiter, see their respective submittals). For Serial or IP control, select from below:
Control a screen or lift with two-way serial communication using RS232. For this you need an MC1.
How Many MC1s?
(Up to four MC1s can be connected via the MC1 1-to-4 Splitter. How many 1-to-4 Splitters?
)
Factory install MC1 inside screen case?
1
Yes
No
There are several additonal control options to choose from:
Dry contact 3-button wall switch
How many?
Low Voltage LED wall switch, power supply and splitter*
How many?
3-position key control switch
How many?
Power supply (on-off) key switch?
How many?
IR remote control eye and one transmitter*
Add IR remote control transmitter
How many extra transmitters?
RF remote control receiver, one transmitter, power supply and splitter*
Add RF remote control transmitter
How many extra transmitters?
*Please note: The MC1 has one data cable input jack. If using more than one IR eye, LED wall switch or RF receiver, a splitter is required. If using more than
one LED wall switch or RF receiver, an additional power supply may also be required (power supply powers up to three total receivers or LED switches).
one LED wall switch or RF receiver, an additional power supply may also be required (power supply powers up to three total receivers or LED switches).
Add data cable splitter (1 per 2 additional inputs)
How many?
Add power supply
How many?
Control a screen or lift with Network Communication (Ethernet). For this you need an MC1 and an LS100.
How Many MC1s?
(Up to four MC1s can be connected via the MC1 1-to-4 Splitter. How many 1-to-4 Splitters?
)
How Many LS100s (Each LS100 can handle one MC1)?
*
Factory install MC1 inside screen case?
2
Yes
No
*Please note: The LS100 connects to the MC1 through the serial pins. To connect an LS100 to an MC1, one RS232 (serial) adapter and one MJA4 modular jack
adapter are required.
adapter are required.
Add MJA4 Modular Cable Adapter
How many?
Add RS232 (Serial) Adapter
How many?
There are several additonal control options to choose from:
Dry contact 3-button wall switch
How many?
Low Voltage LED wall switch, power supply and splitter*
How many?
3-position key control switch
How many?
Power supply (on-off) key switch
How many?
IR remote control eye and one transmitter*
Add IR remote control transmitter
How many extra transmitters?
RF remote control receiver and one transmitter*
Add RF remote control transmitter
How many extra transmitters?
*Please note: The MC1 has one data cable input jack. If using an RF receiver, IR eye or LED wall switch, a splitter is required. If using more than one LED wall
switch or RF receiver, an additional power supply may also be required (power supply powers up to three total receivers or LED switches).
switch or RF receiver, an additional power supply may also be required (power supply powers up to three total receivers or LED switches).
Add data cable splitter (1 per 2 additional inputs)
How many?
Add power supply
How many?
1
MC1 can be built into the following products:
Access/Series E: Factory installed MC1 increases case length by 2
1
/
2
"
Access/Series V: Factory installed MC1 increases case length by 1"
Signature/Series E: Does not increase case length
Signature/Series V: Does not increase case length
Silhouette/Series E: Factory installed MC1 increases case length by 7
Signature/Series E: Does not increase case length
Signature/Series V: Does not increase case length
Silhouette/Series E: Factory installed MC1 increases case length by 7
3
/
8
"
Silhouette/Series V: Factory installed MC1 increases case length by 7
3
/
8
"
Ultimate Access/Series E: Does not increase case length
Ultimate Access/Series V: Does not increase case length
Ultimate Access/Series V: Does not increase case length
(Except for Orbiter, Phantom,
Revelation and ScissorLift. For
these products, see submittals.)
Revelation and ScissorLift. For
these products, see submittals.)
(Except for Orbiter, Phantom,
Revelation and ScissorLift. For
these products, see submittals.)
Revelation and ScissorLift. For
these products, see submittals.)