Intermec 073292-001 用户手册

 

 

Screw
(2 places)

Display
flex cable

Keypad
flex cable

 

Remove the Bluetooth radio (if necessary). For help, see “Replacing the 
Bluetooth Radio” on page 13. 

Attach the new LCD support bar to the new main PCB. 

 

 

LCD support
bar

 

(If necessary) Replace the Bluetooth radio. 

Attach the display flex cable and keypad flex cable to the main PCB. 

Insert the main PCB into the top cover and replace the two Phillips 
screws at the top of the main PCB. 

Replace the radio and antenna assembly or the Ethernet card. 

Connect the power/good read indicator light pipe assembly cable and 
the display cable to the main PCB. 

Close the CK30. For help, see “Closing the CK30” on page 27. 

Download and configure the CK30 using factory tool T45556. You will 
also need an SD card containing the CK30 operating system files.