Intermec 073292-001 用户手册

DBP 

Supported in SE900 compatibility mode. 

EV10 1D imager   

MDS 

MDS mode to be added in a future release. 

DBP 

Supported in architecture, but not implemented. 

E1022/E1025 

Decoded RSTTL 

Supported in architecture, but not implemented. 

EL10 Micro-Mirror Laser 

DBP 

Supported, but not released as a valid 
configuration. 

SE900 

DBP 

This is implemented, but not released as a valid 
configuration. 

SE900HS DBP 

This is implemented, but not released as a valid 
configuration. 

SE1200 

DBP 

Supported. 

SE1200ALR DBP 

Supported. 

I2 and IT4000 2D imagers 

8-bit parallel pixel data 

Supported. 

Tethered undecoded scanners: 

1550C01xx 
128x wands 

DBP  

Supported. 
Supported. 

Tethered decoded scanners: 

1400 
1551E 
1553 
1800 ScanPlus 

Wand-emulation 

Supported, but not released as a valid 
configuration. 

Tethered decoded scanners: 

1400 
1551E 
1553 
1555 
1470B 
1800 ScanPlus 

Decoded RSTTL 

 

Supported in a future release. 
Supported. 
Supported. 
Supported in a future release. 
Supported in a future release. 
Supported in a future release. 

DBP = Legacy laser scanner interface, using DBP, SOS, LAS_EN, and SCAN_EN signals. 

MDS = High-speed serial SPI interface developed by Toulouse for transferring raw A/D data to the host processor. 

RSTTL = TTL-level RS-232 from a scanner with built-in decode. 

Wand-em = Wand emulation mode using only the DBP signal; used by scanners with built-in decode. 

The CK30 platform uses the main processor to decode bar code 
information from undecoded 1D laser, 1D CCD- and CMOS-based 
imagers, and 2D imager input devices. The interface also supports serial-
output decoded scanners.