Intermec 073296-001 用户手册

 

 

Screw
(2 places)

Screw
(2 places)

Screw
(2 places)

Antenna

Antenna
ground
plane

Bottom
cover

Retainer
clips

Mini PCI
shield
assembly

Mini PCI
radio
assembly

 

Use the antenna cable remover tool to carefully lift the antenna off of 
the mini PCI radio assembly. Insert the prongs under the antenna cable 
socket and lift gently. 

 

Note: Do not pull on the wire because the cable will break. If you do 
not have an antenna cable remover, insert your fingernails under the 
antenna cable socket and lift gently. 

Open the radio card retainer clips and pull the mini PCI radio assembly 
away from the connector. 

Insert the new mini PCI radio assembly into the connector until it 
cannot go in any further and then push it down until the radio retainer 
clips lock in place. 

Attach your new antenna cable to the mini PCI radio assembly. 

Replace the mini PCI shield assembly. 

Replace the antenna ground plane and antenna. 

Close the CK30. For help, see “Closing the CK30” on page 27.