Intermec 073300-001 用户手册

Flip main PCB
over to access
Bluetooth radio

Screw
(1 place)

Display
flex cable

Keypad
flex cable

Bluetooth
radio module

Bluetooth radio 
retaining clip

Screw
(2 places)

 

Lift up on the Bluetooth radio module and remove it from the main 
PCB. 

Replace the Bluetooth radio module. 

Replace the Phillips screw that attaches the Bluetooth radio retaining 
clip to the main PCB. 

Connect the display flex cable and the keypad flex cable to the main 
PCB. 

Replace the main PCB and secure it with the two Phillips screws 
removed in Step 3. Make sure the keypad flex cable properly z-folds 
under the main PCB. 

Close the CK30. For help, see “Closing the CK30” on page 27.