Intermec 073300-001 用户手册

 

Open the CK30. For help, see “Opening the CK30” on page 9. 

From the bottom cover, remove the four Phillips screws that attach 
the scan engine assembly. 

Lift the scan engine assembly away from the bottom cover. 

 

 

Screw
(4 places)

SE1200 scan
engine assembly

Large scan mount 
bracket

Screw
(2 places)

 

Turn the scan engine assembly over and remove the two Phillips screws 
that attach the scan engine to the large scan mount bracket. 

Disconnect the scan flex cable from the scan engine. 

Assemble the new scan engine for replacement: 

Remove the adhesive backing from the SE1200 visor and attach it to 
the front of the scan engine. 

Connect the scan flex cable to the scan engine. Make sure you 
completely insert the scan flex cable up to the white alignment mark. 

Thread the scan flex cable through the opening in the shield and set 
the shield over the scan engine.