Cisco 2-port FXS voice/fax interface card VIC2-2FXS= 数据表
产品代码
VIC2-2FXS=
© 2004 Cisco Systems, Inc. All right reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com
Page 5 of 15
Table 3.
VIC/VWIC Options for the IPC High-Density Digital Voice Network Modules
VIC/VWIC Options for
the IPC High-Density
Digital Voice NM
Description
Application
VIC2-2FXS
2-port FXS voice/fax interface card
FXS port is used to connect directly to phones, fax machines, and
key systems. Generates battery polarity reversal and caller ID.
VIC-4FXS/DID
4-port FXS voice/fax interface card (Note: The
DID feature is not supported at this time)
FXS port is used to connect directly to phones, fax machines, and
key systems. Generates battery polarity reversal and caller ID.
VIC2-2FXO
2-port FXO voice/fax interface card [universal
card for all countries]. Also supports analog
Centralized Automated Message Accounting
(CAMA) on any port.
FXO port is used to connect to PBX or key system, or to provide
off-premise connections to PSTN. Supports battery reversal
detection and caller ID. These VICs can be software configured
to work in all countries. Also used to connect to analog CAMA
trunk to provide dedicated E-911 service (North America only).
VIC2-4FXO
4-port FXO voice/fax interface card [universal
card for all countries]. Also supports analog
CAMA on any port.
FXO port is used to connect to PBX or key system, or to provide
off-premise connections to PSTN or PTT. Supports battery
reversal detection and caller ID. These VICs can be software
configured to work in all countries. Also used to connect to analog
CAMA trunk to provide dedicated E-911 service (North America
only).
VIC2-2E/M
2-port E&M voice/fax interface card
Use to connect to PBX or key system as tie lines.
VIC-2DID
2-port DID (direct inward dial) voice/fax interface
card
Use to provide off-premise direct-inward-dial connection from CO
(central office) Serves only incoming calls from the PSTN.
Supports caller ID.
VIC2-2BRI-NT/TE
2-port BRI voice/fax interface card (configurable
for either network or terminal side)
Use to connect as network side or user side to PBX or key
system as off-premise connections (ISDN voice BRI). Supports
Patent Pending flexible L2 and L3 configurations
VIC-1J1
Single-Port J1 Voice Interface Card
Use to connect to Japanese Private Branch Exchanges (PBXs)
using J1 standard interface.
VWIC-1MFT-T1
1-Port RJ-48 Multiflex Trunk-T1 (Voice and
WAN)
Use to connect to PBX, PSTN, or WAN using T1 standard
interface.
VWIC-2MFT-T1
2-Port RJ-48 Multiflex Trunk-T1 (Voice and
WAN)
Use to connect to PBX, PSTN, or WAN using T1 standard
interface.
VWIC-2MFT-T1-DI
2-Port RJ-48 Multiflex Trunk-T1 with drop and
insert (Voice and WAN)
Use to connect to PBX, PSTN, or WAN using T1 standard
interface and provide channel drop and insert capability.
VWIC-1MFT-E1
1-Port RJ-48 Multiflex Trunk-E1 (Voice and
WAN)
Use to connect to PBX, PSTN, or WAN using E1 standard
interface.
VWIC-2MFT-E1
2-Port RJ-48 Multiflex Trunk- E1 (Voice and
WAN)
Use to connect to PBX, PSTN, or WAN using E1 standard
interface.
VWIC-2MFT-E1-DI
2-Port RJ-48 Multiflex Trunk-E1 with drop and
insert (Voice and WAN)
Use to connect to PBX, PSTN, or WAN using E1 standard
interface and provide channel drop and insert capability.
VWIC-1MFT-G703
1-Port RJ-48 Multiflex Trunk-G703 (WAN only)
Use to connect to WAN using unframed G.703 standard
interface.
VWIC-2MFT-G703
2-Port RJ-48 Multiflex Trunk-G703 (WAN only)
Use to connect to WAN using unframed G.703 standard
interface.