Cisco 128-MB ECC memory for OSMs MEM-OSM-128M= 数据表

Cisco Systems, Inc.

All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.

Page 8 of 10

– Supervisor Engine II: WS-X6K-S2-MSFC2

• Recommended with either the Cisco 7600 Series or Cisco Catalyst 6500 Series chassis:

– Switch fabric module—256-Gbps crossbar fabric: WS-C6500-SFM

• Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm)

• Weight: 11.1 lb or 5.0 kg

• Mean time between failure (MTBF): seven years for system configuration

• Power consumption: 220W at 4.25 amps

• Status: green (operational)/red (faulty)/orange (module booting or running diagnostics)

• Link good: green (port active)/orange (disabled)/off (not active/connected)/blinking orange (failed diagnostic and

disabled)

• One 225-MHz R7000 MIPS RISC processor

• Configurable packet/route table memory options per line card:

– 64-MB ECC SDRAM

– 128-MB ECC SDRAM (default)

– 256-MB ECC SDRAM

• Parallel Express Forwarding (PXF) IP services processor(s)

– Provides up to 6 Mpps of distributed IP service application per PXF IP services processor

– Nonconfigurable PXF memory per line card:

128-MB ECC SDRAM of route table memory per PXF IP services processor

4-MB SSRAM of packet processing memory per PXF IP services processor

• SONET MIB (RFC 1595)

• RFC 1157 SNMP

• RFC 1901 through 1907 SNMP v2c

• SNMP v3 MIB

• IF-MIB (RFC 1573)

• CISCO-STACK-MIB

• CISCO-CDP-MIB

• RMON MIB (RFC 1757)

• ENTITY-MIB (RFC 2037)

• HC-RMON

• RFC1213-MIB (MIB-II)

• SMON-MIB

• IP Statistics MIB